Verifying Your Work

To verify proper operation of Layer 2 circuits, use the following commands:

• ping mpls l2circuit interfaceinterface-name
• ping mpls l2circuit virtual-circuit virtual-circuit-id neighbor ip-address
• show l2circuit connections

• Options: [brief] | [down] | [extensive] | [history] | [instance] | [local-site] | [remote-site] |[status] | [summary] | [up] | [up-down]
• show ldp database

In addition to displaying bindings for IP prefixes, the show ldp database command also displays the bindings for the Layer 2 FECs.

The following sections show the output of these commands used with the configuration example:

• Router PE1 Status
• Router P0 Status
• Router PE2 Status

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.