[Contents] [Prev] [Next] [Index] [Report an Error]

Router 1

On Router 1, issue a ping command to the so-0/0/0 interface of Router 4 to send traffic across the IPSec tunnel.

user@R1> ping 10.1.56.2

PING 10.1.56.2 (10.1.56.2): 56 data bytes
64 bytes from 10.1.56.2: icmp_seq=0 ttl=253 time=0.939 ms
64 bytes from 10.1.56.2: icmp_seq=1 ttl=253 time=0.886 ms
64 bytes from 10.1.56.2: icmp_seq=2 ttl=253 time=0.826 ms
^C
--- 10.1.56.2 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.826/0.884/0.939/0.046 ms

You can also issue the traceroute command to verify that traffic to 10.1.56.2 travels over the IPSec tunnel between Router 2 and Router 3. Notice that the second hop does not reference 10.1.15.2—the physical interface on Router 3. Instead, the loopback address of 10.0.0.3 on Router 3 appears as the second hop. This indicates that the IPSec tunnel is operating correctly.

user@R1> traceroute 10.1.56.2

traceroute to 10.1.56.2 (10.1.56.2), 30 hops max, 40 byte packets
 1  10.1.12.1 (10.1.12.1)  0.655 ms  0.549 ms  0.508 ms
 2  10.0.0.3 (10.0.0.3)  0.833 ms  0.786 ms  0.757 ms
 3  10.1.56.2 (10.1.56.2)  0.808 ms  0.741 ms  0.716 ms

[Contents] [Prev] [Next] [Index] [Report an Error]