[Contents] [Prev] [Next] [Index] [Report an Error]

Router 1 Status

On Router 1, issue the show link-management commands to verify if the control channel, TE links, and LMP negotiations are working as expected. The show link-management peer command indicates peer addresses, names, and identifiers, as well as control channel identifiers. The show link-management statistics command shows the number of LMP hellos and messages that have been exchanged. The show link-management te-link command displays names and identifiers configured for the TE link.

user@router1> show link-management peer

Peer name: router4, System identifier: 37495
 State: Up, Control address: 10.255.70.103
   CC local ID CC remote ID State       TxSeqNum  RcvSeqNum Flags
         22515        38882 Up              1692       1691 
  TE links:
   sonet

user@router1> show link-management statistics
Statistics for peer router4
    Received packets
        ConfigAck: 1
        Hello: 748
        LinkSummary: 13
        LinkSummaryAck: 1
    Small packets: 0
    Wrong protocol version: 0
    Messages for unknown peer: 0
    Messages for bad state: 0
    Stale acknowledgements: 0
    Stale negative acknowledgements: 0
    Sent packets
        Config: 24
        Hello: 748  
        LinkSummary: 13
        LinkSummaryAck: 13
    Retransmitted packets
        Config: 18
        LinkSummary: 9
    Dropped packets
        Config: 5
        LinkSummary: 3

user@router1> show link-management te-link
 TE link name: sonet, State: Up
  Local identifier: 8070, Remote identifier: 8070, Local address: 10.35.1.1,
  Remote address: 10.35.1.2, Encoding: SDH/SONET, Switching: PSC-1,
  Minimum bandwidth: 622.08Mbps, Maximum bandwidth: 622.08Mbps,
  Total bandwidth: 622.08Mbps, Available bandwidth: 622.08Mbps
    Name        State Local ID  Remote ID      Bandwidth Used  LSP-name
    so-0/1/2    Up       22279      21303     622.08Mbps   No

[Contents] [Prev] [Next] [Index] [Report an Error]