[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Option: Selecting the Peer Model or the Overlay Model for GMPLS
Juniper Networks supports both the peer model and
the overlay model for GMPLS. To implement the peer model, perform
the following configuration tasks:
- Use the default CSPF calculation that is inherent in MPLS
LSPs.
- Include a TE link and a control channel within the peer statement at the [edit protocols link-management] hierarchy level.
- Reference the peer-interface in both OSPF and
RSVP.
- Configure OSPF and OSPF traffic engineering to connect
with the OXC.
- Optionally, define a GMPLS LSP path.
To implement the overlay model, perform the following
configuration tasks:
- Disable CSPF by including the no-cspf statement
at the [edit protocols mpls label-switched-path lsp-name] hierarchy level.
- Define a strict GMPLS LSP data path to the remote OXC
peer.
- Include a TE link and a control channel within the peer statement at the [edit protocols link-management] hierarchy level.
- Reference the peer-interface in RSVP.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
