[Contents] [Prev] [Next] [Index] [Report an Error]

Establishing FA-LSP Path Information

When you configure explicit LSP paths for an FA-LSP, you must use the TE link remote address as your next-hop address. When CSPF is supported, you can use any path option you wish. However, when CSPF is disabled with the no-cspf statement at the [edit protocols mpls label-switched-path lsp-name] hierarchy level, you must use strict paths.



[edit] 
protocols {


mpls {


path path-name {
                 
next-hop-address (strict | loose);               

}


}


}

Note: If the end-to-end LSP originates on the same routing platform as the FA-LSP, you must disable CSPF and use strict paths.

[Contents] [Prev] [Next] [Index] [Report an Error]