[Contents] [Prev] [Next] [Index] [Report an Error]

Displaying Routes

When you need to verify route information for a routing matrix, you must issue operational commands on the TX Matrix platform. To display available routes for the routing matrix, issue a show route command:

user@router> show route summary

Router ID: 10.255.77.158
inet.0: 13 destinations, 14 routes (12 active, 0 holddown, 1 hidden)
              Direct:      4 routes,      3 active
               Local:      2 routes,      2 active
              Static:      6 routes,      6 active
               IS-IS:      2 routes,      1 active
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
                 LDP:      1 routes,      1 active
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
              Direct:      1 routes,      1 active
mpls.0: 7 destinations, 7 routes (7 active, 0 holddown, 0 hidden)
                MPLS:      3 routes,      3 active
                 LDP:      2 routes,      2 active
               L2CKT:      2 routes,      2 active
inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
              Direct:      2 routes,      2 active
__juniper_private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
              Direct:      1 routes,      1 active
l2circuit.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden)
                 LDP:      1 routes,      1 active
               L2CKT:      4 routes,      4 active

[Contents] [Prev] [Next] [Index] [Report an Error]