[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring Input SCU on the vt Interface of the Egress PE
Router
To enable SCU in a Layer 3 VPN, configure source
class usage on the virtual loopback tunnel (vt) interface
of the egress provider edge (PE) router that is either configured
for or equipped with a Tunnel PIC. The interface is equivalent to
the inbound SCU interface, so use the input statement at
the [edit interfaces vt-interface-number unit
0 family inet accounting source-class-usage] hierarchy level:
- [edit]
- interfaces {
-
- vt-0/3/0 {
-
- unit 0 {
-
- family inet {
-
- accounting {
-
- source-class-usage {
- input;
- }
- }
- }
- }
- }
- }
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
