[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring GMPLS

To implement GMPLS, you must configure traffic link management protocol traffic engineering links and protocol peers and OSPF and RSVP peer interfaces, establish GMPLS LSP path information, define GMPLS paths, discover local identifiers and configure remote identifiers. This section contains these configuration procedures plus some optional configuration procedures:

Configuring Link Management Protocol Traffic Engineering Links
Configuring Link Management Protocol Peers
Configuring Peer Interfaces in OSPF and RSVP
Establishing GMPLS LSP Path Information
Defining GMPLS Label-Switched Paths
Discovering Local Identifiers and Configuring Remote Identifiers
Option: Tearing Down GMPLS LSPs Gracefully
Option: Allowing Nonpacket GMPLS LSPs to Establish a Path Through JUNOS-Based Routers
Option: Selecting the Peer Model or the Overlay Model for GMPLS
Option: GMPLS Graceful Restart
Option: Configuring an LMP Control Channel
Option: Configuring GMPLS Support for Unnumbered Links

[Contents] [Prev] [Next] [Index] [Report an Error]