AIS Setup Sequence > Install AI-Scripts

AI-Scripts JUNOS configuration, installation, and activation must be performed on JUNOS devices to automatically detect incident and intelligence events occurring during operation. Download AI-Script install packages from the Juniper software download site to the local host running AIM.

NOTE: It does not matter whether AI-Scripts or AIM is installed first. However, for both, it is necessary, to know the archive location (archive-site destination) used for devices to send incident and intelligence JMBs and for AIM to retrieve this data. You can add the archive location to the device JUNOS configuration for both AI-Scripts and AIM after the initial installation, but the components are not really usable until the archive location is configured.

There are two ways to install AI-Scripts: automatically or manually.

• Automatic AI-Script installation is recommended for installing to many devices at once using the JUNOScope. You install AI-Scripts using AIM Organization settings (see Automatically Installing AI-Script Bundles. When installing AI-Scripts automatically, there is no manual intervention required.
• Manual AI-Script installation requires that you configure the device configuration before installing an install packages. You must perform manual AI-Script installation on each device separately. Therefore, manual AI-Script installation is not recommended for many network devices. For more information, see Manually Configuring and Installing AI-Scripts on Devices