Installing Advanced Insight Manager

This chapter describes how to install the Advanced Insight Manager (AIM) application on a UNIX or LINUX host in your network, connect to AIM Web browser and log in, uninstall AIM.

This chapter also provides a reference for command options used to use the AIM services, including mysql, aimService, jboss, and allservices.

The AIS administrator can install AIM and the JUNOScope software on the same server. JUNOScope is not required, but is recommended to automatically configure JUNOS and install AI-scripts onto multiple devices at once. It is recommended that you install and set up the JUNOScope software before you install AIM. (See Installing and Setting Up JUNOScope Software for AIS.)

NOTE: It does not matter whether AI-Scripts or AIM is installed first. However, for both, it is necessary, to know the archive location (archive-site destination) used for devices to send incident and intelligence JMBs and for AIM to retrieve this data. You can add the archive location to the device JUNOS configuration for both AI-Scripts and AIM after the initial installation, but the components are not really usable until the archive location is configured.

This chapter includes the following sections:

• AIM System Requirements
• AIM application Client Workstation Requirements
• Information Requested During Installation
• Downloading the AIM Application
• Running the AIM Application Installer
• Configuring the ai_manager.rc file
• Starting and Stopping AIM Application Services
• Using AIM Application Services Scripts
• Connecting to the AIM Application and Logging In
• Changing the AIM Administrator Password
• Uninstalling the AIM Application
• AIM Application Installation Directory Structure