Update LSP Encoding Type Event

LSP Event

Update Encoding Type

Sample Output

user@host> show mpls lsp extensive

Ingress LSP: 1 sessions

10.255.255.40

  From: 10.255.255.35, State: Up, ActiveRoute: 0, LSPname: gmpls-lsp1

  Bidirectional

  ActivePath: path-lsp1 (primary)

  LoadBalance: Random

  Signal type: STM-1

  Encoding type: SDH/SONET, Switching type: Fiber, GPID: PPP

 *Primary   path-lsp1             State: Up

    Bandwidth: 155.52Mbps

    Computed ERO (S [L] denotes strict [loose] hops): (CSPF metric: 2)

          10.35.100.1 S 10.35.150.1 S 10.35.200.1 S 

    Received RRO:

          10.35.100.1 10.35.150.1 10.35.200.1

    7 Nov  7 15:47:11  Selected as active path

    6 Nov  7 15:47:11  Record Route:  10.35.100.1 10.35.150.1 10.35.200.1

    5 Nov  7 15:47:11  Up

    4 Nov  7 15:47:11  Update LSP Encoding Type

    3 Nov  7 15:47:11  Originate Call

    2 Nov  7 15:47:11  CSPF: computation result accepted

    1 Nov  7 15:46:41  CSPF failed: no route toward 10.255.255.40

  Created: Thu Nov  7 15:46:38 2002

Total 1 displayed, Up 1, Down 0

What It Means

This LSP event indicates that the encoding type was updated based on the traffic engineering link selected as the first hop.

Cause

This LSP event occurs when the encoding type is not configured on a non-packet LSP. In this case, the encoding type is derived from the traffic engineering link that was selected as the first hop.

Action

Not available.