Index
A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
Symbols
- #, in configuration statements 1
- ( ), in syntax descriptions 1
- +, statement value indicator 1
- < >, in syntax descriptions 1
- >, container statement indicator 1
- ?, help command
- usage guidelines 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- |, in syntax descriptions 1
A
- activate command, usage guidelines 1
- add/drop multiplexer See ADM1
- address entries 1
- Address Resolution Protocol See ARP1
- address statement 1
- ADM 1, 2, 3
- AIS alarms
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- AIS-L alarms 1
- AIS-P alarms 1
- figure 1
- alarm indication signal line See AIS-L alarms1
- alarm indication signal path See AIS-P alarms1
- alarm indication signal See AIS alarms1
- alarms
- AIS, locating 1
- AIS-L, locating 1
- AIS-P, locating 1
- ATM interfaces, checklist 1
- Channelized DS-3 interfaces, checklist 1
- Channelized OC-12 interfaces, checklist 1
- Channelized OC-12 IQ interfaces, checklist 1
- Fast Ethernet interfaces, checklist 1
- Gigabit Ethernet interfaces, checklist 1
- LINK, displaying 1
- LOP-P, locating 1
- LOS, locating 1
- Multichannel DS-3 interfaces, checklist 1
- PLL, locating 1
- SONET interfaces, checklist 1
- SONET network, figure 1, 2
- T1 interfaces, checklist 1
- T3 interfaces, checklist 1
- UNEQ-P, locating 1
- yellow, locating 1
- annotate command, usage guidelines 1
- ARP configuration steps 1
- Asynchronous Transfer Mode See ATM1
- ATM cells 1
- ATM interfaces 1
- active alarms and defects, table 1
- alarms and errors
- checklist 1
- See SONET interfaces, alarms and errors1
- See T3 interfaces, alarms and errors1
- circuit problems 1
- clear interfaces statistics command 1
- clocking, setting 1
- configuring local 1
- edit interfaces command 1
- edit interfaces sonet-options command 1, 2
- edit interfaces t3-options command 1, 2
- error statistics 1
- extensive status 1
- input and output errors, table 1
- loopback
- configuring local, figure 1
- creating physical 1
- monitor checklist 1
- overview 1
- physical link
- down, table 1
- status 1
- ping interface command 1
- set clocking internal command 1
- set loopback local command 1
- set loopback remote command 1
- show chassis hardware command 1
- show interfaces command 1
- show interfaces extensive command 1, 2
- show interfaces terse command 1
- statistics
- checking errors 1
- resetting 1
- status
- description, table 1
- extensive 1
- verifying 1
- transmit clock 1
- type, determining 1
- ATM1 interfaces 1
- configuration, checking 1
- errors 1
- loopback, testing checklist 1
- monitor checklist 1
- monitor interface command 1
- physical link down 1
- pic-type statement 1
- set cli terminal command 1
- show chassis hardware command 1
- show configuration interfaces command 1
- show interfaces command 1
- show interfaces extensive command 1
- statistics, monitoring 1
- status
- displaying for specific 1
- extensive 1
- ATM2 IQ interfaces 1
- configuration checking 1
- errors 1
- loopback, testing checklist 1
- maximum-vcs statement 1
- monitor checklist 1
- monitor interface command 1
- overview 1
- physical link up 1
- pic-type statement 1
- promiscuous mode 1
- set cli terminal command 1
- show chassis hardware command 1
- show configuration interfaces command 1
- show interfaces command 1
- show interfaces extensive command 1
- show interfaces terse command 1
- status
- displaying for specific 1
- extensive 1
- autonegotiation, table 1
B
- BER alarms, SONET interfaces 1
- BERR-SD alarms 1
- BERR-SF alarms 1
- bit error rate See BER alarms1
- bit error rate-signal degrade See BERR-SD alarms1
- bit error rate-signal failure See BERR-SF alarms1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
C
- C2 byte, SONET interfaces 1
- cables
- damaged or dirty 1, 2, 3
- mismatch 1, 2, 3
- multimode fiber 1
- single-mode fiber 1, 2, 3
- CCC, protocol family 1
- cell-payload scrambling 1
- channel, Channelized OC-12 IQ interfaces 1
- channelization levels, controller interface 1
- Channelized DS-3 interfaces
- alarms and errors 1
- circuit problem 1
- clear interfaces statistics command 1
- edit interfaces command 1, 2
- edit interfaces t1-options command 1, 2
- edit interfaces t3-options command 1
- encapsulation, configuring 1
- errors 1
- link layer, forcing up 1
- local loopback, configuring 1
- logical interface 1
- loopback test checklist 1
- loopback, configuring
- from specific T1 interface 1
- monitor interface command 1
- monitor, checklist 1
- no keepalives, configuring 1
- notification messages 1
- physical link status 1, 2
- physical loopback, creating 1
- ping interface command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2, 3, 4
- show interfaces terse command 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- displaying 1, 2
- displaying specific 1, 2
- extensive 1
- logical interface, verifying 1
- t1-options statement 1, 2
- t3-options statement 1
- channelized DS-3 to DS-0 interfaces
- alarms and errors 1
- clear interfaces statistics command 1
- logical interface 1
- monitor interfaces command 1
- ping interface command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2, 3
- show interfaces terse command 1
- channelized DS-3 to DS-1 interfaces
- alarms and errors 1
- clear interfaces statistics command 1
- monitor interfaces command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2
- show interfaces terse command 1
- channelized interfaces 1
- Channelized DS-3, status, displaying 1
- errors 1, 2, 3
- Multichannel DS-3, status, displaying 1
- naming
- DS-3 to DS-0 1
- DS-3 to DS-1 1
- IQ interfaces 1
- notification messages 1
- OC-12 IQ status, displaying 1
- OC-12 status, displaying 1
- overview 1
- physical link down 1, 2
- statistics monitoring 1
- status 1, 2, 3
- extensive 1, 2, 3
- Channelized OC-12 interfaces
- alarms 1
- alarms and errors 1
- checklist for alarms 1
- circuit problem 1
- clear interfaces statistics command 1
- defects 1
- edit interfaces command 1, 2
- edit interfaces t3-options command 1
- encapsulation, configuring 1
- errors 1, 2
- link layer, forcing up 1
- local loopback, configuring 1
- logical interface 1
- loopback test checklist 1
- loopback, configuring
- for entire T3 interface 1
- monitor
- checklist 1
- statistics 1
- monitor interface command 1
- no keepalives, configuring 1
- physical link status 1, 2
- physical loopback, creating 1
- ping interface command 1
- set cli terminal command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show command 1
- show interfaces coc1 command 1
- show interfaces coc12 command 1
- show interfaces command 1, 2
- show interfaces ct1 command 1
- show interfaces ct3 command 1
- show interfaces extensive command 1, 2, 3
- show interfaces terse command 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- displaying 1
- displaying for specific 1
- extensive 1
- logical interface, verifying 1
- t3-options statement 1, 2
- Channelized OC-12 IQ interfaces
- alarms and errors 1
- checklist for alarms 1
- circuit problem 1
- configuration 1, 2
- figure 1
- controller interface 1
- channelization levels 1
- figure 1
- status, displaying 1, 2
- edit interfaces command 1, 2
- edit interfaces t3-options command 1
- encapsulation, configuring 1
- errors 1
- hierarchy 1
- individual channels down 1
- link layer, forcing up 1
- local loopback, configuring 1
- logical interface 1
- loopback test checklist 1
- loopback, configuring
- for entire T3 interface 1
- monitor checklist 1
- no keepalives, configuring 1
- physical link status 1, 2
- physical loopback, creating 1
- ping interface command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show command 1
- show interfaces command 1, 2, 3, 4
- show interfaces controller command 1
- show interfaces extensive 1
- show interfaces extensive command 1, 2, 3
- show interfaces terse coc command 1
- show interfaces terse command 1
- specific
- channel, displaying status 1
- figure 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- displaying 1
- displaying for specific 1
- extensive 1
- logical interface, verifying 1
- t3-options statement 1
- checklist for alarms
- ATM interfaces 1
- Channelized DS-3 alarms 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 alarms 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- checklist for determining ATM type 1
- checklist for loopback testing
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- checklist for monitoring
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- checklist for payload scrambling, SONET 1
- checklist for SONET frame checksum 1
- checksum, SONET frame 1
- circuit cross-connect See CCC, protocol family1
- circuit problems
- ATM interfaces 1
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- Cisco-HDLC, configuring encapsulation
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- clear command, usage guidelines 1
- clear interfaces statistics command
- ATM interfaces 1
- Channelized DS-3 interfaces 1
- channelized DS-3 to DS-0 interfaces 1
- channelized DS-3 to DS-1 interfaces 1
- Channelized OC-12 interfaces 1
- Fast Ethernet interfaces 1
- Fast Ethernet statistics 1
- SONET interfaces 1, 2
- T1 interfaces 1
- T3 interfaces 1
- CLI
- configuration mode
- +, statement value indicator 1
- >, container statement indicator 1
- changes, uncommitted, exiting with 1
- characters requiring quotation marks 1
- command history, displaying list of 1
- commands, table 1
- configuration See configuration, router1
- description 1
- entering 1
- example configuration 1
- exiting 1
- help, displaying 1
- hierarchy tree, description 1
- navigation commands, table 1
- operational mode commands 1
- statement path, example 1
- top-level commands, table 1
- top-level statements, table 1
- description 1
- operational mode 1
- command completion 1
- command history, displaying 1
- commands, table 1
- description 1
- entering 1
- help 1
- top-level commands, table 1
- using 1
- clock
- location of onboard, table 1
- out-of-tolerance 1
- clock sources
- figure 1
- SONET interfaces 1
- clocking 1
- ATM interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- clocking statement, usage guidelines 1
- command-line interface See CLI1
- commands
- configuration mode CLI, table 1
- operational mode CLI, table 1
- commands for router management, interfaces 1, 2
- comments, in configuration statements 1
- commit command, usage guidelines 1, 2
- concatenate mode, SONET interfaces 1
- configuration mode, CLI
- +, statement value indicator 1
- >, statement container indicator 1
- command history, displaying 1
- commands
- activate 1
- annotate 1
- commit 1
- copy 1
- deactivate 1
- delete 1
- edit 1
- exit 1
- help 1
- insert 1
- load 1
- paste 1
- quit 1
- rollback 1
- run 1
- save 1
- set 1
- show 1
- status 1
- table 1
- top 1
- top-level, table 1
- up 1
- update 1
- configuration hierarchy, description 1
- configuration See configuration, router1
- description 1
- entering 1
- example configuration 1
- help about statements, getting 1
- hierarchy tree, description 1
- identifier, description 1
- messages
- locked database 1
- uncommitted changes 1
- user editing locked configuration 1
- navigation commands, table 1
- operational mode commands, running within 1
- statement
- characters requiring quotation marks 1
- container 1
- deleting 1
- description 1
- leaf 1
- statement hierarchy, figure 1
- statement path, example 1
- statements, top-level
- accounting-options 1
- chassis 1
- class-of-service 1
- firewall 1
- forwarding-options 1
- groups 1
- interfaces 1
- policy-options 1
- protocols 1
- routing-instances 1
- routing-options 1
- snmp 1
- system 1
- table 1
- uncommitted changes, exiting with 1
- configuration, interfaces
- ATM interfaces, incorrect 1
- Channelized OC-12 IQ 1, 2
- figure 1
- checking
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- configuration, router
- activating 1
- at a specific level, displaying 1
- at current hierarchy level, displaying 1
- changing while configuration is locked 1
- committed, most recent, returning to and loading without activating 1
- currently running on the router, displaying 1
- edit command, using 1
- entire hierarchy, deleting sections 1
- example 1
- file, saving 1
- format 1
- last current committed, displaying 1
- modifying 1
- previous, displaying 1
- prior to most recently committed, returning to 1
- saving and activating 1
- saving to a text file 1
- saving, activating, and exiting 1
- set command, using 1
- statement, deleting 1
- syntax checking 1
- uncommitted changes, exiting with 1
- users currently editing, displaying 1
- configure command
- usage guidelines 1
- connections, verifying 1
- connectors, network, and interface names 1
- controller interface
- Channelized OC-12 IQ interfaces 1, 2
- levels of channelization, figure 1
- show interfaces command 1
- conventions, documentation 1
- copy command
- usage guidelines 1
- counters 1
- craft interface, LED alarms 1
- cumulative statistics
- Ethernet interfaces 1
- SONET interfaces 1
- curly braces, in configuration statements 1
- customer support, contacting 1
D
- data integrity 1
- deactivate command
- usage guidelines 1
- delete command
- usage guidelines 1
- delete fcs 32 command 1
- descriptors, configuring 1
- documentation conventions 1
- downstream, SONET alarms and errors, defining 1
- DS-0 interface 1
E
- edit command
- usage guidelines 1, 2
- edit interfaces command 1, 2
- ATM interfaces 1
- Channelized DS-3 interfaces 1, 2
- Channelized OC-12 interfaces 1, 2
- Channelized OC-12 IQ interfaces 1, 2
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1, 2, 3
- T1 interfaces 1, 2, 3
- T3 interfaces 1, 2, 3
- edit interfaces fastether-options command 1
- edit interfaces gigether-options command 1
- edit interfaces sonet-options command
- ATM interfaces 1, 2
- SONET interfaces 1, 2, 3
- edit interfaces t1-options command
- Channelized DS-3 interfaces 1, 2
- Multichannel DS-3 interfaces 1, 2
- T1 interfaces 1, 2
- edit interfaces t3-options command
- ATM interfaces 1, 2
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1, 2
- Channelized OC-12 IQ interfaces 1, 2
- Multichannel DS-3 interfaces 1, 2
- T3 interfaces 1, 2
- encapsulation
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- error statistics
- ATM interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- OC-3 ATM interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 ATM interfaces 1
- T3 interfaces 1
- errors
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1
- channelized interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Ethernet interfaces 1
- Fast Ethernet interfaces, table 1, 2
- Gigabit Ethernet interfaces, table 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1, 2
- Ethernet interfaces
- autonegotiation, table 1
- RJ-45 1
- specifications, table 1
- exit command
- usage guidelines 1
- exit configuration-mode command
- usage guidelines 1
- external clocking 1
F
- failure, upstream and downsteam 1
- family
- descriptors 1
- statement 1
- Fast Ethernet interfaces
- alarms, LINK 1
- autonegotiation, table 1
- circuit problems 1, 2
- clear interfaces statistics command 1
- counters 1, 2
- edit interfaces command 1
- LINK alarms, checklist 1
- local loopback, configuring 1
- loopback testing, checklist 1
- monitor checklist 1
- monitor interface command 1
- monitoring 1
- overview 1
- physical loopback 1
- ping interface command 1
- set arp command 1
- set cli terminal command 1
- set loopback local command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2
- show interfaces terse command 1
- static ARP entry, configuring 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- description, table 1
- displaying 1
- errors, table 1, 2
- extensive 1
- verifying 1
- fiber-optic
- connection 1
- Ethernet interface specifications, table 1
- interface, physical loopback 1
- file command, usage guidelines 1
- filenames, listing 1
- Flexible PIC Concentrator See FPC1
- Forwarding Module See SFM1
- FPC 1
- frame checksum, SONET interfaces 1
- frame error control, SONET interfaces overview 1
- frames, SONET 1
- framing errors
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
G
- Gigabit Ethernet interfaces
- alarms, LINK 1
- autonegotiation, table 1
- circuit problems 1
- counters 1, 2
- edit interfaces command 1
- LINK alarms, checklist 1
- local loopback, configuring 1
- loopback plug, creating 1
- loopback testing, checklist 1
- monitor checklist 1
- monitor interface command 1
- monitoring 1
- overview 1
- physical loopback, creating 1
- ping interface command 1
- set arp command 1
- set cli terminal command 1
- set loopback local command 1
- show interfaces command 1, 2
- show interfaces extensive command 1, 2
- show interfaces terse command 1, 2
- static ARP entry, configuring 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- description, table 1
- displaying 1
- displaying specific 1
- errors, table 1
- extensive 1
- verifying 1
- GR-253 CORE 1, 2
H
- H1/H2 bytes, SONET interfaces 1
- HDLC
- configuring encapsulation
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- payload scrambling
- SONET interfaces, checking 1
- help
- command, usage guidelines 1, 2
- reference command, usage guidelines 1
- topic command, usage guidelines 1
- hierarchy
- Channelized OC-12 IQ interfaces 1
- SONET 1
I
- IDLE signal, T3 interfaces 1
- input keepalives, SONET interfaces 1
- insert command
- usage guidelines 1
- interface names
- examples 1
- logical part 1
- physical part 1
- separators 1
- interfaces
- alarms 1
- descriptors 1
- displaying order in configurations 1
- investigation process 1, 2
- locating alarms 1
- loopback test commands, table 1
- monitoring commands, table 1
- monitoring, general steps 1
- names and naming 1, 2
- slot, PIC, and port locations 1
- supported by JUNOS software, table 1
- interfaces statement 1
- internal clocking 1
- International Organization for Standardization See ISO, protocol family1
- Internet Protocol, version 4 See IPv41
- Internet Protocol, version 6 See IPv61
- investigation process 1
- interfaces 1, 2
- IPv4 1
- IPv6 1
- IQ interfaces, naming channelized 1
- ISO, protocol family 1
J
- JUNOS software, supported interfaces, table 1
K
- keepalives, disabling 1
L
- line overhead bytes 1, 2, 3
- lines, SONET 1
- line-terminating equipment See LTE1
- link layer, forcing up
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- link stability 1
- load command
- usage guidelines 1
- LOF alarms
- T1 interfaces 1
- T3 interfaces 1
- logical interfaces
- descriptors 1
- SONET interfaces, status 1, 2
- T1 interfaces, status 1
- T3 interfaces, status 1
- logical part, interface name 1
- loopback test, checklists
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- loopback, configuring local 1
- ATM interfaces 1
- ATM interfaces, figure 1
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- loopback, creating physical
- ATM interfaces 1
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- loopback, plug 1
- LOP-P alarms 1
- LOS alarms
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- loss of pointer path alarms, SONET interfaces 1
- loss of signal See LOS alarm1
- LTE 1
M
- maximum-vcs statement 1
- ATM2 IQ interfaces 1
- MCS 1
- Miscellaneous Control Subsystem See MCS1
- monitor command
- usage guidelines 1
- monitor interface command
- ATM1 interface 1
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1
- channelized DS-3 to DS-0 interfaces 1
- channelized DS-3 to DS-1 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- mtrace command
- usage guidelines 1
- Multichannel DS-3 interfaces
- alarms and errors 1, 2
- checklist for alarms 1
- circuit problem 1
- clear interface statistics command 1
- edit interfaces command 1
- edit interfaces t1-options command 1, 2
- edit interfaces t3-options command 1, 2
- encapsulation, configuring 1
- errors 1
- link layer, forcing up 1
- local loopback, configuring 1
- loopback test checklist 1
- loopback, configuring
- for entire T3 interface 1
- from specific T1 interface 1
- monitor
- channelized 1
- checklist 1
- monitor interfaces command 1, 2
- no keepalives, configuring 1
- physical link status 1, 2, 3
- physical loopback, creating 1
- ping interface command 1
- problems, table 1
- set cli terminal command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1, 2
- set no-keepalives command 1
- show command 1
- show interfaces command 1, 2
- show interfaces extensive command 1, 2, 3
- show interfaces terse command 1
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- displaying 1, 2
- displaying specific 1
- extensive 1
- logical interface, verifying 1
- t1-options statement 1, 2
- t3-options statement 1, 2
- Multilink Frame Relay See MLFR1
- Multilink PPP See MLPPP1
- multimode fiber cable 1
- Multiprotocol Label Switching See MPLS1
N
- naming
- channelized interfaces 1
- interfaces 1, 2
- network 1, 2, 3, 4, 5, 6, 7, 8
- network connectors, and interface names 1
- no-keepalives, configuring
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- nonconcatenate mode, SONET interfaces 1
- notification messages, logging for 1, 2
O
- OC-1 interface 1
- OC-3 ATM interface
- extensive output 1
- status 1
- OC-3 SONET interface 1
- onboard clock 1
- operational mode, CLI
- command completion 1, 2
- command history, displaying 1
- commands
- all available, listing 1
- clear 1
- configure 1
- file 1
- help 1, 2
- monitor 1
- mtrace 1
- of a particular letter, listing 1
- ping 1
- pipe 1
- quit 1
- request 1
- restart 1
- set 1
- show 1
- ssh 1
- start 1
- table 1
- telnet 1
- test 1
- top-level, listing 1
- traceroute 1
- description 1
- entering 1
- exiting 1
- filenames, listing 1
- using 1
- optical attenuation 1, 2, 3
- output keepalives, SONET interfaces 1
P
- packet over SONET See POS1
- paste command
- usage guidelines 1
- path area, SONET interfaces 1
- path overhead bytes 1, 2
- path-terminating equipment See PTE1
- payload
- mismatch path See PLM-P1
- pointer, SONET interfaces 1
- scrambling
- checking 1
- configuring 1
- SONET interfaces 1
- status 1
- SONET interfaces 1
- phase lock loop alarms, SONET interfaces 1
- physical interfaces, descriptors 1
- physical link down
- ATM interfaces, table 1
- ATM1 interfaces 1
- Channelized DS-3 interfaces 1
- channelized interfaces 1, 2, 3
- Channelized OC-12 interfaces 1
- Fast Ethernet interfaces, table 1
- Gigabit Ethernet interfaces, table 1
- Multichannel DS-3 interfaces, table 1
- SONET interfaces 1, 2
- table 1
- T1 interfaces 1, 2
- table 1
- T3 interfaces 1, 2
- table 1
- physical link up
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1
- channelized interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1, 2
- Gigabit Ethernet interfaces 1, 2
- SONET interfaces 1
- T1 interfaces 1, 2
- T3 interfaces 1, 2
- physical loopback
- ATM interfaces 1
- Channelized DS-3 interfaces 1
- channelized interfaces 1, 2
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- physical part, interface name 1
- pic-type statement
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- ping command
- usage guidelines 1
- ping interface command
- ATM interfaces 1
- Channelized DS-3 interfaces 1
- channelized interfaces 1, 2
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- pipe command
- usage guidelines 1
- PLL alarms 1
- PLM-P 1
- POS 1
- problems
- ATM interfaces, table 1
- channelized interfaces, table 1
- provisioning
- SONET interfaces 1
- UNEQ-P alarms 1
- T1 interfaces, table 1, 2
- promiscuous mode, ATM2 IQ interfaces 1
- properties, for physical interfaces 1
- protocol families, supported 1
- PTE 1
Q
- quit command
- usage guidelines 1, 2
R
- RDI alarms, SONET interfaces 1
- RDI-L alarms 1
- RDI-P alarms 1
- red alarm bell 1
- REI alarms, SONET interfaces 1
- REI-L alarms 1
- REI-P alarms 1
- remote defect indication line See RDI-L alarms1
- remote defect indication path See RDI-P alarms1
- remote defect indication See RDI alarms1
- remote error indication line See REI-L alarms1
- remote error indication path See REI-P alarms1
- remote error indication See REI alarms1
- repeaters 1
- request command
- usage guidelines 1
- restart command
- usage guidelines 1
- RJ-45 Ethernet interface 1
- rollback command
- usage guidelines 1
- routers, path-terminating equipment 1
- run command
- usage guidelines 1, 2
S
- save command
- usage guidelines 1, 2
- SBR 1
- SCB 1
- SCG 1
- scrambling, SONET payload 1
- section overhead
- bytes 1, 2
- SONET frame 1
- section-terminating equipment See STE1
- separators, in interface names 1
- set arp command
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- set cli terminal command
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized OC-12 interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set clocking internal command
- ATM interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set command
- usage guidelines 1, 2, 3
- set encapsulation command
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set fcs 16 command 1
- set fcs 32 command 1
- set loopback local command
- ATM interfaces 1
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set loopback remote command
- ATM interfaces 1
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Multichannel DS-3 interfaces 1, 2
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set no-keepalives command
- Channelized DS-3 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Multichannel DS-3 interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- set payload-scrambler command 1, 2, 3
- set rfc-2615 command 1
- SFM 1
- show chassis hardware command 1
- show cli history command
- usage guidelines 1
- show command 1, 2, 3, 4
- usage guidelines 1, 2, 3
- show configuration command 1
- usage guidelines 1
- show configuration interfaces command
- ATM1 interfaces 1, 2
- ATM2 IQ interfaces 1, 2
- SONET interfaces 1
- show interfaces coc1 command 1
- show interfaces coc12 command 1
- show interfaces command 1, 2, 3
- ATM interfaces 1
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1, 2, 3
- channelized DS-3 to DS-0 interfaces 1, 2, 3
- channelized DS-3 to DS-1 interfaces 1, 2
- Channelized OC-12 interfaces 1, 2, 3
- Channelized OC-12 IQ interfaces 1, 2, 3, 4, 5
- controller interface 1
- DS-3 to DS-1interfaces 1, 2
- Fast Ethernet interfaces 1, 2, 3
- Gigabit Ethernet interfaces 1, 2
- SONET interfaces 1, 2, 3, 4
- T1 interfaces 1, 2, 3
- T3 interfaces 1, 2
- show interfaces controller command 1
- show interfaces ct1 command 1
- show interfaces ct3 command 1
- show interfaces extensive command 1, 2
- ATM interfaces 1, 2
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1, 2, 3, 4
- channelized DS-3 to DS-0 interfaces 1, 2, 3, 4
- channelized DS-3 to DS-1 interfaces 1
- Channelized OC-12 interfaces 1, 2, 3
- Channelized OC-12 IQ interfaces 1, 2, 3, 4
- Fast Ethernet interfaces 1, 2
- Gigabit Ethernet interfaces 1, 2
- SONET interfaces 1, 2, 3, 4
- T1 interfaces 1, 2
- T3 interfaces 1, 2
- show interfaces terse coc command 1
- show interfaces terse command
- ATM interfaces 1
- ATM1 interfaces 1
- ATM2 IQ interfaces 1, 2
- Channelized DS-3 interfaces 1
- channelized DS-3 to DS-0 interfaces 1
- channelized DS-3 to DS-1 interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1, 2
- SONET interfaces 1, 2
- T1 interfaces 1, 2
- T3 interfaces 1, 2
- signal transmission 1
- Single Board Router See SBR1
- single-mode fiber cable 1, 2, 3
- SONET clock generator See SCG1
- SONET frames 1
- line overhead bytes 1
- path overhead bytes 1
- section overhead bytes 1
- SONET interfaces 1
- alarms and errors
- AIS alarms 1
- AIS-L alarms 1
- AIS-P alarms 1
- BER alarms 1
- BERR-SD alarms 1
- BERR-SF alarms 1
- displaying 1
- LOP-P alarms 1
- LOS alarms 1
- overview, figure 1
- path signal label assignments, table 1
- PLL alarms 1
- PLM-P alarms 1
- RDI alarms 1
- RDI-L alarms 1
- RDI-P alarms 1
- REI alarms 1
- REI-L alarms 1
- REI-P alarms 1
- UNEQ-P alarms 1
- alarms and errors checklist 1
- C2 byte 1
- circuit problems 1
- clear interfaces statistics command 1
- clocking
- default 1
- external 1
- internal 1
- setting 1
- concatenate mode 1
- delete fcs 32 command 1
- displaying for specific 1
- edit interfaces command 1, 2, 3
- edit interfaces sonet-options command 1, 2, 3
- encapsulation, configuring 1
- error statistics 1
- frame 1
- checksum checklist 1
- error control 1
- further investigation 1
- H1/H2 bytes 1
- HDLC payload scrambling 1
- line area 1
- link layer, forcing up 1
- logical interface, status 1
- loopback
- configuring local 1
- creating physical 1
- test checklist 1
- monitor checklist 1
- no keepalives
- configuring 1
- setting 1
- nonconcatenate mode 1
- overview 1
- path area 1
- payload scrambling
- checklist 1
- configuring 1
- conflicts 1
- described 1
- levels 1
- status 1
- physical link down, table 1
- ping interface command 1
- provisioning, problems 1, 2
- section area 1
- set cli terminal command 1
- set clocking internal command 1
- set encapsulation command 1
- set fcs 16 command 1
- set fcs 32 command 1
- set loopback local command 1
- set loopback remote command 1
- set no keepalives command 1
- set payload-scrambler command 1
- show configuration interfaces command 1
- show interfaces command 1, 2, 3, 4, 5
- show interfaces extensive command 1, 2, 3, 4, 5, 6
- show interfaces terse command 1, 2
- statistics
- checking errors 1
- monitoring 1
- resetting 1
- status
- description table 1
- displaying 1
- extensive 1
- verifying 1
- STS frame 1
- transmit clock 1
- transmitted path trace, checking 1
- SONET network 1
- line area 1
- network, figure 1
- section area 1
- span 1
- system hierarchy 1
- sonet-options statement 1, 2, 3, 4
- span and SONET line 1
- span, and SONET line 1
- SPE 1, 2
- specifications for fiber-optic, table 1
- SSB 1
- ssh command
- usage guidelines 1
- start command
- usage guidelines 1
- statements
- configuration mode CLI, top-level 1
- static address resolution protocol 1
- statistic error
- Fast Ethernet interfaces 1
- statistics
- ATM interfaces, resetting 1
- ATM1 interfaces 1
- channelized interfaces 1, 2
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- cumulative for SONET interfaces 1
- errors
- ATM interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- Fast Ethernet interfaces 1
- resetting 1
- Gigabit Ethernet interfaces 1
- resetting 1
- SONET interfaces, resetting 1
- T1 interfaces
- checking 1
- monitoring 1
- resetting 1
- T3 interfaces
- checking 1
- monitoring 1
- resetting 1
- status
- ATM interfaces 1
- Channelized DS-3 interfaces 1, 2
- channelized interfaces 1, 2
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- controller interface 1
- Fast Ethernet interfaces 1, 2
- Gigabit Ethernet interfaces 1, 2
- Multichannel DS-3 interfaces 1
- SONET interfaces 1, 2
- T1 interfaces 1, 2, 3
- T3 interfaces 1
- status command
- usage guidelines 1
- status description, table
- ATM interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- status extensive
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- Channelized DS-3 interfaces 1
- channelized interfaces 1
- Channelized OC-12 interfaces 1
- Channelized OC-12 IQ interfaces 1
- Fast Ethernet interfaces 1
- Gigabit Ethernet interfaces 1
- SONET interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- status for specific interface
- ATM 1
- Channelized OC-12 1
- Channelized OC-12 IQ 1
- Fast Ethernet 1
- Gigabit Ethernet 1
- SONET 1
- T1 1
- T3 1
- STE 1
- steps and commands, overview 1
- STS
- frame 1, 2
- path signal label assignments, figure 1
- path signal label assignments, table 1
- support, technical
- customer support, contacting 1
- supported processes 1
- synchronous payload envelope See SPE1
- synchronous transfer signals See STS1
- System and Switch Board See SSB1
- system board, location of, table 1
- System Control Board See SCB1
- system hierarchy, SONET interfaces 1
T
- T1 interfaces
- alarms and errors
- AIS alarms 1
- definitions, table 1
- displaying 1
- LOF alarms 1
- LOS alarms 1
- yellow alarms 1
- circuit problems 1
- clear statistics command 1, 2, 3, 4
- configuring local 1
- edit interfaces command 1, 2, 3
- edit interfaces t1-options command 1, 2
- encapsulation, configuring 1
- error statistics 1
- further investigation 1
- HDLC, configuring encapsulation 1
- link layer, forcing up 1
- logical interface, status 1
- loopback
- creating physical 1
- test checklist 1
- loopback, creating physical 1
- monitor checklist 1
- monitor interface command 1
- no keepalives, configuring 1
- overview 1
- physical link status 1
- ping command 1
- ping interface command 1
- set cli terminal command 1
- set clocking internal command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2
- show interfaces terse command 1, 2
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- description, table 1
- displaying all 1
- displaying specific 1
- extensive 1
- supported standards 1
- transmit clocks 1
- T1 media alarms, table 1, 2
- t1-options statement 1, 2, 3, 4
- T3 ATM interfaces
- extensive output 1
- physical link down 1
- physical link up 1
- T3 interfaces
- alarms and errors
- AIS alarms 1
- checklist 1
- displaying 1
- IDLE signals 1
- LOS alarms 1
- yellow alarms 1
- circuit problems 1
- clocking, setting 1
- edit interfaces command 1, 2, 3
- edit interfaces t3-options command 1, 2
- encapsulation, configuring 1
- error statistics 1
- further investigation 1
- HDLC, configuring encapsulation 1
- link layer, forcing up 1
- logical interface, status 1
- loopback
- configuring local 1
- creating physical 1
- loopback test checklist 1
- monitor checklist 1
- monitor interface command 1
- no keepalives, configuring 1
- overview 1
- physical link status 1
- ping interface command 1
- set cli terminal command 1
- set clocking internal command 1
- set encapsulation command 1
- set loopback local command 1
- set loopback remote command 1
- set no-keepalives command 1
- show interfaces command 1, 2, 3
- show interfaces extensive command 1, 2, 3
- show interfaces terse command 1, 2
- statistics
- checking error 1
- monitoring 1
- resetting 1
- status
- description, table 1
- displaying 1
- displaying all 1
- displaying specific 1
- extensive 1
- verifying 1
- supported standards 1
- transmit clocks 1
- t3-options statement 1, 2, 3, 4, 5, 6, 7
- TCC, protocol family 1
- technical support
- customer support, contacting 1
- telcordia/bellcore standard GR-253 CORE 1
- telnet command
- usage guidelines 1
- test command
- usage guidelines 1
- timing source, diagnosing SONET alarms 1
- TNP, protocol family 1
- top command
- usage guidelines 1
- traceroute command
- usage guidelines 1
- translational cross-connect See TCC, protocol family1
- transmit clocks, configuring 1
- transmit light level 1
- Trivial Network Protocol See TNP, protocol family1
- tunnel statement 1
- typefaces, documentation conventions 1
U
- UNEQ-P alarms 1
- unequipped payload alarms, SONET interfaces 1
- unit statement 1
- up command
- usage guidelines 1
- update command
- usage guidelines 1
- upstream or downstream failure, figure 1, 2
- upstream, SONET alarms and errors, defining 1
V
- VCI, configuration
- ATM1 interfaces 1
- ATM2 IQ interfaces 1
- virtual channel identifier See VCI, configuration1, 2
Y
- yellow alarm bell 1
- yellow alarms
- T1 interfaces 1
- T3 interfaces 1