Step 3: Display Extensive Status Information for a Specific T3 Interface
Action
To display extensive status information about a specific channelized DS-3 to DS-0 interface or channelized DS-3 to DS-1 interface, use one of the following CLI operational mode commands:
user@host>show interfaces ds-fpc/pic/port:channel:channelextensiveuser@host>show interfaces t1-fpc/pic/port:channelextensiveSample Output
The following sample output is for a channelized DS-3 to DS-0 interface:
user@host>show interfaces ds-2/1/0:5:1 extensivePhysical interface: ds-2/1/0:5:1, Enabled, Physical link is UpInterface index: 36, SNMP ifIndex: 133, Generation: 35Description: CustomerLink-level type: Cisco-HDLC, MTU: 1504, Clocking: Internal, Speed: 64kbps, FCS: 16, Mode: M23,Framing: ESFDevice flags : Present RunningInterface flags: Point-To-Point SNMP-TrapsLink flags : KeepalivesHold-times : Up 0 ms, Down 0 msKeepalive settings: Interval 10 seconds, Up-count 1, Down-count 3Keepalive statistics:Input : 2 (last seen 00:00:05 ago)Output: 2 (last sent 00:00:05 ago)Statistics last cleared: 2002-08-01 10:14:45 UTC (00:00:16 ago)Traffic statistics:Input bytes : 524 304 bpsOutput bytes : 528 304 bpsInput packets: 8 0 ppsOutput packets: 8 0 ppsInput errors:Errors: 0, Drops: 0, Framing errors: 0, Policed discards: 10, L3 incompletes: 0,L2 channel errors: 0, L2 mismatch timeouts: 0, HS link CRC errors: 0Output errors:Carrier transitions: 0, Errors: 0, Drops: 0, Aged packets: 0DS1 alarms : NoneDS3 alarms : NoneDS1 defects : NoneDS3 defects : NoneT1 media: Seconds Count StateSEF 0 0 OKBEE 0 0 OKAIS 0 0 OKLOF 0 0 OKLOS 0 0 OKYELLOW 0 0 OKBPV 0 0EXZ 0 0LCV 0 0PCV 0 0CS 0 0LES 0ES 0SES 0SEFS 0BES 0UAS 0DS3 media: Seconds Count StatePLL Lock 0 0 OKReframing 0 0 OKAIS 0 0 OKLOF 0 0 OKLOS 0 0 OKIDLE 0 0 OKYELLOW 0 0 OKBPV 0 0EXZ 0 0LCV 0 0PCV 0 0LES 0PES 0PSES 0SEFS 0UAS 0Interface transmit queues:B/W WRR Packets Bytes Drops ErrorsQueue0 95 95 4 336 0 0Queue1 5 5 1 22 0 0HDLC configuration:Giant threshold: 1514, Runt threshold: 3Timeslots : 1Byte encoding: Nx64K, Data inversion: DisabledDS3 BERT configuration:BERT time period: 0 seconds, Elapsed: 0 secondsAlgorithm: Unknown (0), Induced Error rate: 10e-0DS1 BERT configuration:BERT time period: 0 seconds, Elapsed: 0 secondsInduced Error rate: 10e-0, Algorithm: 2^15 - 1, O.151, Pseudorandom (9)PFE configuration:Destination slot: 2, PLP byte: 2 (0x2f)CoS transmit queue Bandwidth Buffer Priority Limit% bps % bytes0 best-effort 0 0 0 0 low none1 expedited-forwarding 0 0 0 0 low none2 assured-forwarding 0 0 0 0 low none3 network-control 0 0 0 0 low noneLogical interface ds-2/1/0:5:1.0 (Index 14) (SNMP ifIndex 134) (Generation 13)Flags: Point-To-Point SNMP-Traps Encapsulation: Cisco-HDLCProtocol inet, MTU: 1500, Flags: None, Generation: 20 Route table: 0Addresses, Flags: Is-Preferred Is-PrimaryDestination: 192.168.140.196/30, Local: 192.168.140.197,Broadcast: Unspecified,Generation: 22The following sample output is for a channelized DS-3 to DS-1 interface:
user@host>show interfaces t1-2/1/0:19 extensivePhysical interface: t1-2/1/0:19, Enabled, Physical link is UpInterface index: 50, SNMP ifIndex: 59, Generation: 49Description: CustomerLink-level type: Cisco-HDLC, MTU: 1504, Clocking: Internal, Speed: T1, Loopback: None, FCS: 16,Mode: M23, Framing: ESFDevice flags : Present RunningInterface flags: Point-To-Point SNMP-TrapsLink flags : KeepalivesHold-times : Up 0 ms, Down 0 msKeepalive settings: Interval 10 seconds, Up-count 1, Down-count 3Keepalive statistics:Input : 117 (last seen 00:00:08 ago)Output: 121 (last sent 00:00:01 ago)Statistics last cleared: 2002-08-01 10:14:45 UTC (00:19:38 ago)Traffic statistics:Input bytes : 22459734 236888 bpsOutput bytes : 162288645 1322208 bpsInput packets: 201233 214 ppsOutput packets: 236341 227 ppsInput errors:Errors: 0, Drops: 0, Framing errors: 0, Policed discards: 377, L3 incompletes: 0,L2 channel errors: 0, L2 mismatch timeouts: 0, HS link CRC errors: 0, SRAM errors: 0Output errors:Carrier transitions: 0, Errors: 0, Drops: 0, Aged packets: 0DS1 alarms : NoneDS3 alarms : NoneDS1 defects : NoneDS3 defects : NoneT1 media: Seconds Count StateSEF 0 0 OKBEE 0 0 OKAIS 0 0 OKLOF 0 0 OKLOS 0 0 OKYELLOW 0 0 OKBPV 0 0EXZ 0 0LCV 0 0PCV 0 0CS 0 0LES 0ES 0SES 0SEFS 0BES 0UAS 0DS3 media: Seconds Count StatePLL Lock 0 0 OKReframing 0 0 OKAIS 0 0 OKLOF 0 0 OKLOS 0 0 OKIDLE 0 0 OKYELLOW 0 0 OKBPV 0 0EXZ 0 0LCV 0 0PCV 0 0LES 0PES 0PSES 0SEFS 0UAS 0Interface transmit queues:B/W WRR Packets Bytes Drops ErrorsQueue0 95 95 234494 162020375 0 0Queue1 5 5 164 5808 0 0HDLC configuration:Giant threshold: 1514, Runt threshold: 3Timeslots : All activeLine encoding: B8ZS, Byte encoding: Nx64K, Data inversion: DisabledDS3 BERT configuration:BERT time period: 0 seconds, Elapsed: 0 secondsAlgorithm: Unknown (0), Induced Error rate: 10e-0DS1 BERT configuration:BERT time period: 10 seconds, Elapsed: 0 secondsInduced Error rate: 10e-0, Algorithm: 2^15 - 1, O.151, Pseudorandom (9)PFE configuration:Destination slot: 2, PLP byte: 2 (0xab)CoS transmit queue Bandwidth Buffer Priority Limit% bps % bytes0 best-effort 0 0 0 0 low none1 expedited-forwarding 0 0 0 0 low none2 assured-forwarding 0 0 0 0 low none3 network-control 0 0 0 0 low noneLogical interface t1-2/1/0:19.0 (Index 27) (SNMP ifIndex 125) (Generation 26)Flags: Point-To-Point SNMP-Traps Encapsulation: Cisco-HDLCProtocol inet, MTU: 1500, Flags: None, Generation: 34 Route table: 0Addresses, Flags: Is-Preferred Is-PrimaryDestination: 192.168.118.96/30, Local: 192.168.118.97,Broadcast: Unspecified, Generation: 44What It Means
The sample output shows where the errors might be occurring. Look at the active alarms and active defects for the DS-1 or DS-3 interface and diagnose the media accordingly. See Locate Multichannel DS-3 Alarms and Errors for an explanation of Multichannel DS-3 alarms.