Displaying Redundant MCS Hardware Information

Action

To display whether there are redundant MCSs installed in a router and to get hardware information, use the following command-line interface (CLI) command:

user@ host> show chassis hardware

Sample Output

user@host> show chassis hardware

Hardware inventory:

Item             Version  Part number  Serial number     Description

Chassis                                51029             M160

Midplane         REV 05   710-001245   AW3223

FPM CMB          REV 03   710-001642   AH5190

FPM Display      REV 03   710-001647   AW2021

CIP              REV 04   710-002649   AG5779

PEM 0            Rev 03   740-001243   LK16612           Power Entry Module

PEM 1            Rev 03   740-001243   LK16604           Power Entry Module

PCG 0            REV 07   710-001568   HF1164

PCG 1            REV 07   710-001568   HF1159

Routing Engine 0 REV 01   740-003239   AARCHOO           RE-2.0

Routing Engine 1 REV 01   740-003239   AARCHOO           RE-2.0

MCS 0            REV 11   710-001226   AV4425

MCS 1            REV 11   710-001226   HD2842 

[...Output truncated...]

What It Means

The command output displays the MCS slot number, revision level, part number, and serial number. Give this information to the Juniper Networks Technical Assistance Center (JTAC) if an MCS fails.