[Contents] [Prev] [Next] [Index] [Report an Error]


Step 2: Check the Component LEDs

Action

To check the component LED status, do one of the following:

The output shows the messages that are currently displayed on the craft interface (for routers that have a display on the craft interface).

For examples of sample output, see the JUNOS System Basics and Services Command Reference.


Table 25: Component LED Location on the Router or Platform
Component
LED Location on the Router
Router or Platform

CB

On the Control Board (CB) faceplate.

T320 router and T640 routing node

FPC

On the FPC faceplate at the front of the router.

M20, M40, M40e, and M160 routers

Host module

On the craft interface. Remove the component cover.

M40e and M160 routers

MCS

On the Miscellaneous Control System (MCS) faceplate at the rear of the router. Remove the component cover.

M40e and M160 routers

PIC

On the craft interface.

On the PIC faceplate at the front of the router.

M5 and M10 routers
All other routers

PCG

On the PFE clock generator (PCG) faceplate at the rear of the router. Remove the component cover.

M40e and M160 routers

Power supply

On the power supply faceplate at the bottom rear of the router.

All routers

Routing Engine

On the rear Routing Engine panel.

On the craft interface.

M20 router
M20, M40, M40e, and M160 routers

SCB

On the System Control Board (SCB) faceplate at the front of the router, vertical in the middle of the FPC card cage.

M40 router

SCG

On the SONET Clock Generator (SCG) faceplate.

T320 router and T640 routing node

SFM

On the Switching and Forwarding Module (SFM) faceplate at the rear of the router. Remove the component cover.

M40e and M160 routers

SIB

On the SIB faceplate.

T320 router and T640 routing node

SSB

On the System and Switch Board (SSB) faceplate at the top front of the router.

M20 router



[Contents] [Prev] [Next] [Index] [Report an Error]