Step 4: Stop Trace File Monitoring

Action

To stop monitoring a trace file in near-real time, use the following JUNOS CLI operational mode command after you have started monitoring:

monitor stop filename

Sample Output

user@host> monitor start isis 

user@host> 

*** isis ***

Sep 15 18:32:21 Updating LSP isis5.02-00 in database

Sep 15 18:32:21 Updating L2 LSP isis5.02-00 in TED

Sep 15 18:32:21 Adding a half link from isis5.02 to isis6.00

Sep 15 18:32:21 Adding a half link from isis5.02 to isis5.00

Sep 15 18:32:21 Adding a half link from isis5.02 to isis6.00

Sep 15 18:32:21 Adding a half link from isis5.02 to isis5.00

Sep 15 18:32:21 Scheduling L2 LSP isis5.02-00 sequence 0xd87 on interface fxp2.3

Sep 15 18:32:21 Updating LSP isis5.00-00 in database

Sep 15 18:32:21 Updating L1 LSP isis5.00-00 in TED

Sep 15 18:32:21 Sending L2 LSP isis5.02-00 on interface fxp2.3

Sep 15 18:32:21     sequence 0xd87, checksum 0xc1c8, lifetime 1200

monitor stop isis 

user@host>