|
|
|---|
clear
|
Clear statistics and protocol database information.
Syntax: clear (arp | bgp | firewall | helper | igmp | ike | ilmi | interfaces | ipsec | ipv6 | isis | ldp | log | mpls | msdp | multicast | ospf | pim | rip | ripng | route | rsvp | snmp | system | vrrp)
|
configure
|
Enter CLI configuration mode.
Alternative commands: configure <exclusive> <private>
|
file
|
Perform file manipulation operations, such as copy, delete, list, rename, and show.
Syntax: file (compare | copy | delete | list | rename | show)
|
help
|
Provide help information.
Syntax: help (reference | syslog | topic)
|
monitor
|
Monitor a log file or interface traffic in real time.
Syntax: monitor (interface | list | start | stop | traffic)
|
mtrace
|
Display trace information about a multicast path from a source to a receiver.
Syntax: mtrace (from-source | monitor | to-gateway)
|
ping
|
Verify IP connectivity to another IP host or Asynchronous Transfer Mode (ATM) connectivity (ping ATM) using Operation Administration and Maintenance (OAM) cells to an ATM endstation.
Syntax: ping host <interface source-interface> <bypass-routing> <count requests> <do-not-fragment> <interval seconds> <pattern string> <record-route> <routing-instance routing-instance-name> <size bytes> <strict> <tos type-of-service> <ttl value> <via route> <rapid | detail>
Syntax: ping atm interface interface <count count> <end-to-end | segment> <interval interval> <sequence-number sequence-number> <vci vci> <brief>
Syntax: ping vpn-interface vpn-interface host <local echo-address>
|
pipe
|
Filter the output of an operational mode or configuration mode command.
Syntax: | (compare | count | display <detail | inheritance | xml> | except pattern | find pattern | last lines | match pattern | no-more | resolve <file-names> | save filename | trim columns)
|
quit
|
Log out from the CLI process.
Syntax: quit
|
request
|
Make system-level requests, such as halt or reboot the router, load software packages, and back up the router's file systems.
Syntax: request system (halt | reboot | snapshot | software)
|
restart
|
Restart the router hardware or software processes.
Syntax: restart (fpc | class-of-service | gracefully | immediately | interface-control | mib-process | network-access-service | remote-operations | routing | sampling | sfm | snmp | soft)
|
set
|
Set CLI properties, the router's date and time, and the craft interface display text.
Syntax: set (chassis | cli | date)
|
show
|
Show information about all aspects of the software, including interfaces and routing protocols.
Syntax: show (accounting | aps | arp | as-path | bgp | chassis | cli | configuration | connections | dvmrp | firewall | helper | host | igmp | ike | ilmi | interfaces | ipsec | ipv6 | isis | l2circuit | l2vpn | ldp | link-management | log | mpls | msdp | multicast | ntp | ospf | pfe | pim | policer | policy | rip | ripng | route | rsvp | sap | snmp | system | task | ted | version | vrrp)
|
ssh
|
Open a secure shell to another host.
Syntax: ssh host <bypass-routing> <routing-instance routing-instance-name> <source address> <vpn-interface vpn-interface> <v1 | v2>
|
start
|
Start a software process.
Syntax: start shell
|
telnet
|
Start a telnet session to another host.
Syntax: telnet host <8bit> <bypass-routing> <inet | inet6> <noresolve> <port port> <interface interface-name> <routing-instance routing-instance-name> <source address> <vpn-interface vpn-interface>
|
test
|
Run various diagnostic debugging commands.
Syntax: test (configuration | interface | msdp | policy)
|
traceroute
|
Trace the route to a remote host.
Syntax: traceroute host <as-number-lookup> <bypass-routing> <gateway address> <inet | inet6> <noresolve> <routing-instance routing-instance-name> <source address> <tos value> <ttl value> <vpn-interface vpn-interface> <wait seconds>
|