RMON Events

An RMON event allows you to log the crossing of thresholds of other MIB objects. It is defined in eventTable for the RMON MIB.

This section covers the following topics:

• eventTable
• Using eventTable to Log Alarms

eventTable

eventTable contains the following objects:

• eventIndex—An index that uniquely identifies an entry in eventTable. Each entry defines one event that is generated when the appropriate conditions occur.
• eventDescription—A comment describing the event entry.
• eventType—Type of notification that the probe makes about this event.
• eventCommunity—Trap group used if an SNMP trap is to be sent. If eventCommunity is not configured, a trap is sent to each trap group configured with the rmon-alarm category.
• eventLastTimeSent—Value of sysUpTime when this event entry last generated an event.
• eventOwner—Any text string specified by the creating management application or the command-line interface (CLI). Typically, it is used to identify a network manager (or application) and can be used for fine access control between participating management applications.
• eventStatus—Status of this event entry.

  Note: If this object is not set to valid, no action is taken by the associated event entry. When this object is set to valid, all previous log entries associated with this entry (if any) are deleted.

Using eventTable to Log Alarms

To use eventTable to log alarms, perform the following tasks:

• Creating an Event Entry
• Configuring the MIB Objects
• Activating a New Row in eventTable
• Deactivating a Row in eventTable

Creating an Event Entry

The RMON eventTable controls the generation of notifications from the router. Notifications can be logs (entries to logTable and syslogs) or SNMP traps. Each event entry can be configured to generate any combination of these notifications (or no notification). When an event specifies that an SNMP trap is to be generated, the trap group that is used when sending the trap is specified by the value of the associated eventCommunity object. Consequently, the community in the trap message will match the value specified by eventCommunity. If nothing is configured for eventCommunity, a trap is sent using each trap group that has the rmon-alarm category configured.

Configuring the MIB Objects

Once you have created the new row in eventTable, set the following objects:

• eventType
• eventCommunity
• eventOwner
• eventDescription

The eventType object is required. All other objects are optional.

eventType

The type of notification that the router generates when the event is triggered.

This object can be set to the following values:

• log—Adds the event entry to logTable.
• log-and-trap—Sends an SNMP trap and creates a log entry.
• none—Sends no notification.
• snmptrap—Sends an SNMP trap.

For example, to set eventType for event #1 to log-and-trap, use the following SNMP Set request:

snmpset -Os -v2c router community eventType.1 i log-and-trap

eventCommunity

The trap group that is used when generating a trap (if eventType is configured to send traps). If that trap group has the rmon-alarm trap category configured, a trap is sent to all the targets configured for that trap group. The community string in the trap matches the name of the trap group (and hence, the value of eventCommunity). If nothing is configured, traps are sent to each group with the rmon-alarm category set. For example, to set eventCommunity for event #1 to boy-elroy, use the following SNMP Set request:

snmpset -Os -v2c router community eventCommunity.1 s "boy-elroy"

Note: The eventCommunity object is optional. If you do not set this object, then the field is left blank.

eventOwner

Any text string specified by the creating management application or the command-line interface (CLI). Typically, it is used to identify a network manager (or application) and can be used for fine access control between participating management applications.

For example, to set eventOwner for event #1 to george jetson, use the following SNMP Set request:

snmpset -Os -v2c router community eventOwner.1 s "george jetson"

Note: The eventOwner object is optional. If you do not set this object, then the field is left blank.

eventDescription

Any text string specified by the creating management application or the command-line interface (CLI). The use of this string is application dependent.

For example, to set eventDescription for event #1 to spacelys sprockets, use the following SNMP Set request:

snmpset -Os -v2c router community eventDescription.1 s "spacelys sprockets"

Note: The eventDescription object is optional. If you do not set this object, then the field is left blank.

Activating a New Row in eventTable

To activate the new row in eventTable, set eventStatus to valid using an SNMP Set request such as:

snmpset -Os -v2c router community eventStatus.1 i valid

Deactivating a Row in eventTable

To deactivate a row in eventTable, set eventStatus to invalid using an SNMP Set request such as:

snmpset -Os -v2c router community eventStatus.1 i invalid

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.