jnxVpnIfRowStatus

jnxVpnifEntry 4

–

–

–

–

–

–

Creates, modifies, or deletes a row in this table.

jnxVpnIfStorageType

jnxVpnifEntry 5

–

–

–

–

–

–

Identifies the storage type for an object.

jnxVpnIfAssociationPw

jnxVpnifEntry 6

–

Yes

Yes

Yes

No

–

The index of the associated pseudowire. If no index is associated with a pseudowire, the index is 0. A pseudowire is a mechanism that carries essential elements of an emulated circuit from one provider edge (PE) device to one or more other PEs over a PSN.

jnxVpnIfProtocol

jnxVpnifEntry 7

No

Yes

Yes

Yes

No

–

Indicates the protocol running over a VPN interface.

This object contains the following values:

• other(0)
• frameRelay(1)
• atmAal5(2)
• atmCell(3)
• ethernetVlan(4)
• ethernet(5)
• ciscoHdlc(6)
• ppp(7)
• cem(8)
• atmVcc(9)
• atmVpc(10)
• vpls(11)
• ipInter- working(12)
• snapInter- working(13)
• static(20)
• rip(21)
• ospf(22)
• bgp(23)
• atmTrunkNNI (129)
• atmTrunkUNI (130)

jnxVpnIfInBandwidth

jnxVpnifEntry 8

No

No

No

No

No

–

The maximum bandwidth that the customer edge (CE) device connected over a VPN can send to the PE device, in kilobytes per second. A value of 0 indicates that there is no configured maximum.

jnxVpnIfOutBandwidth

jnxVpnifEntry 9

No

No

No

No

No

–

The maximum bandwidth that the PE device can send to the CE device over a VPN interface, in kilobytes per second. A value of 0 indicates that there is no configured maximum.

jnxVpnIfStatus

jnxVpnifEntry 10

Yes

Yes

Yes

Yes

No

–

Status of a monitored VPN interface.

This object contains the following values:

• unknown(0)
• noLocal- Interface(1)
• disabled(2)
• encapsulation-Mismatch(3)
• down(4)
• up(5)