jnxPingResultsRttUs
|
jnxPingResultsEntry 1
|
The round-trip delays measured for the most recent successful
probe during this test, in microseconds.
|
jnxPingResultsSumRttUs
|
jnxPingResultsEntry 2
|
The sum of the round-trip delays measured for all the probes
during this test, in microseconds.
|
jnxPingResultsMinRttUs
|
jnxPingResultsEntry 3
|
The minimum of the round-trip delays measured for all the probes
during this test, in microseconds.
|
jnxPingResultsMaxRttUs
|
jnxPingResultsEntry 4
|
The maximum of the round-trip delays measured for all the probes
during this test, in microseconds.
|
jnxPingResultsAvgRttUs
|
jnxPingResultsEntry 5
|
The average of the round-trip delays measured for all the probes
during this test, in microseconds.
|
jnxPingResultsStdDevRttUs
|
jnxPingResultsEntry 6
|
The standard deviation of the round-trip delays measured during
this test, in microseconds.
|
jnxPingResultsEgressUs
|
jnxPingResultsEntry 7
|
The egress trip delays measured for the most recent successful
probe during this test, in microseconds. This applies only if the
probe type (pingCtlType) provides one-way delay measurements.
For all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsMinEgressUs
|
jnxPingResultsEntry 8
|
The minimum of the egress trip delays measured over all probes
during this test, in microseconds. This applies only if the probe
type (pingCtlType) provides one-way delay measurements. For
all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsMaxEgressUs
|
jnxPingResultsEntry 9
|
The maximum of the egress trip delays measured over all probes
during this test, in microseconds. This applies only if the probe
type (pingCtlType) provides one-way delay measurements. For
all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsAvgEgressUs
|
jnxPingResultsEntry 10
|
The average of the egress trip delays measured over all probes
during this test, in microseconds. This applies only if the probe
type (pingCtlType) provides one-way delay measurements. For
all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsStddevEgressUs
|
jnxPingResultsEntry 11
|
The standard deviation of the egress trip delays measured over
all probes during this test, in microseconds. This applies only if
the probe type (pingCtlType) provides one-way delay measurements.
For all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsIngressUs
|
jnxPingResultsEntry 12
|
The ingress trip delays measured for the most recent successful
probe during this test, in microseconds. This applies only if the
probe type (pingCtlType) provides one-way delay measurements.
For all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsMinIngressUs
|
jnxPingResultsEntry 13
|
The minimum of the ingress trip delays measured over all probes
during this test, in microseconds. This applies only if the probe
type (pingCtlType) provides one-way delay measurements. For
all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsMaxIngressUs
|
jnxPingResultsEntry 14
|
The maximum of the ingress trip delays measured over all probes
during this test, in microseconds. This applies only if the probe
type (pingCtlType) provides one-way delay measurements. For
all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsAvgIngressUs
|
jnxPingResultsEntry 15
|
The average of the ingress trip delays measured over all probes
during this test, in microseconds. This applies only if the probe
type (pingCtlType) provides one-way delay measurements. For
all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsStddevIngressUs
|
jnxPingResultsEntry 16
|
The standard deviation of the ingress trip delays measured over
all probes during this test, in microseconds. This applies only if
the probe type (pingCtlType) provides one-way delay measurements.
For all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsJitterRttUs
|
jnxPingResultsEntry 17
|
The jitter of the round-trip delays measured for all probes
during this test, in microseconds.
|
jnxPingResultsJitterEngressUs
|
jnxPingResultsEntry 18
|
The jitter of the engress trip delays measured for all probes
during this test, in microseconds. This applies only if the probe
type (pingCtlType) provides one-way delay measurements. For
all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsJitterIngressUs
|
jnxPingResultsEntry 19
|
The jitter of the ingress trip delays measured for all probes
during this test, in microseconds. This applies only if the probe
type (pingCtlType) provides one-way delay measurements. For
all other probe types, their values are irrelevant and will return
0.
|
jnxPingResultsStatus
|
jnxPingResultsEntry 20
|
The result of the most recent probe.
|
jnxPingResultsTime
|
jnxPingResultsEntry 21
|
The date and time of the most recent probe result.
|
jnxPingResultsOwnerIndex
|
jnxPingResultsEntry 22
|
The first index. It has the same value as pingCtlOwnerIndex and is provided for applications that are unable to obtain the value
of pingCtlOwnerIndex from the instance portion of the object
identifiers belonging to this table.
|
jnxPingResultsTestName
|
jnxPingResultsEntry 23
|
The other index. It has the same value as pingCtlTestName and is provided for applications that are unable to obtain the value
of pingCtlTestName from the instance portion of the object
identifiers belonging to this table.
|
