Configuring the RADIUS Local IP Address and NAS ID (SRC CLI)

Use the following configuration statements to set the local RADIUS address and network access server (NAS ID):

slot number sae radius {
local-address local-address ;
local-nas-id local-nas-id ;
}

To set the local RADIUS address and NAS ID:

  1. From configuration mode, access the SAE RADIUS configuration. This configuration is under the slot 0 hierarchy.
    [edit]
    user@host# edit slot 0 sae radius
  2. Configure the local IP address that the SAE uses to communicate with RADIUS servers.
    [edit slot 0 sae radius]
    user@host# set local-address local-address
  3. Configure the NAS ID that identifies the SAE when it sends RADIUS authentication and accounting records. Typically, the NAS ID is the name of the SAE host.
    [edit slot 0 sae radius]
    user@host# set local-nas-id local-nas-id
  4. (Optional) Verify your configuration.
    [edit slot 0 sae radius]
user@host# show
local-address 10.10.4.20;
local-nas-id SAE.host1;

Published: 2009-09-25

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.