Configuring Local Parameters (SRC CLI)

You create local parameters within a policy group. Use the following configuration statements to configure local parameters.

policies group name local-parameters name {
description description ;
default-value default-value ;
type type ;
}

To configure local parameters:

  1. From configuration mode, enter the local parameter configuration. For example, to configure a local parameter called bandwidthFactor:
    user@host# edit policies group policer local-parameters bandwidthFactor
  2. (Optional) Enter a description for the parameter. You can provide extra information and examples of how the parameter is used.
    [edit policies group policer local-parameters bandwidthFactor]
    user@host# set description description
  3. (Optional) Configure a default value that the policy engine uses if no other values are provided during the parameter value acquisition process.

    See Parameter Types for valid values of each parameter type.

    [edit policies group policer local-parameters bandwidthFactor]
    user@host# set default-value default-value
  4. (Optional) Set the type of attribute for which you can use the parameter.
    [edit policies group policer local-parameters bandwidthFactor]
    user@host# set type type
  5. (Optional) Verify your configuration.
    [edit policies group policer local-parameters bandwidthFactor]
user@host# show
default-value 1024*1024;
type rate;

Published: 2009-09-22

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.