Configuring Destination Networks (SRC CLI)

Use the following configuration statements to add destination networks to a classify-traffic condition:

policies group name list name rule name traffic-condition name destination-network network {
ip-address ip-address ;
ip-mask ip-mask ;
ip-operation ip-operation ;
}

To add a destination network to a classify-traffic condition:

  1. From configuration mode, enter the destination network within a classify-traffic condition. For example:
    user@host# edit policies group dhcp list in rule forward-dhcp traffic-condition client-dhcp destination-network network
  2. (Optional) Configure the IP address of the destination network or host.
    [edit policies group dhcp list in rule forward-dhcp traffic-condition client-dhcp destination-network network]
    user@host# set ip-address ip-address
  3. (Optional) Configure the IP mask of the destination network or host.
    [edit policies group dhcp list in rule forward-dhcp traffic-condition client-dhcp destination-network network]
    user@host# set ip-mask ip-mask
  4. (Optional) Specify whether the software matches packets with an IP address that is equal or not equal to the specified address and mask.
    [edit policies group dhcp list in rule forward-dhcp traffic-condition client-dhcp destination-network network]
    user@host# set ip-operation ip-operation
  5. (Optional) Verify your destination network configuration.
    [edit policies group dhcp list in rule forward-dhcp traffic-condition client-dhcp destination-network network]
user@host# show 
ip-address interface_ipAddress;
ip-mask interfac_ipMask;
ip-operation is;
    
                        
    
                     
    6. 
                  

                  

                     

                     
Published: 2009-09-22

                  

               

            

         

      

   
Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.