Configuring Resolution Information for a NIC Proxy (SRC CLI)

Use the following statements to configure resolution information for a NIC proxy:

nic-proxy-configuration name resolution {
resolver-name resolver-name;
key-type key-type;
value-typevalue-type;
expect-multiple-values;
constraints constraints;
}

To configure resolution information for a NIC proxy:

  1. From configuration mode, access the configuration statement that specifies the NIC proxy configuration.
    [edit]
    user@host# component-hierarchy nic-proxy-configuration name resolution

    For example:

    [edit]
    user@host# edit shared sae configuration nic-proxy-configuration ip resolution
  2. Specify the NIC resolver that this NIC proxy uses.
    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set resolver-name resolver-name

    This resolver must be the same as one that is configured on the NIC host. For example:

    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set resolver-name /realms/ip/A1
  3. Specify the NIC data type that the key provides for the NIC resolution.
    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set key-type key-type

    For example:

    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set key-type ip

    To qualify data types, enter a qualifier within parentheses after the data type; for example, to specify username as a qualifier for the key LoginName:

    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set key-type LoginName (username)
  4. Specify the type of value to be returned in the resolution for the application that uses the NIC proxy.
    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set value-type value-type

    For example:

    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set value-type SaeId
  5. (Optional) If the key can have more than one value, specify that the key can have multiple corresponding values.
    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set expect-multiple-values
  6. (Optional. Available at the Advanced editing level.) If the application provides a constraint in the resolution request, specify the data type for the constraint. The constraint represents a condition that must or may be satisfied before the next stage of the resolution process can proceed.
    [edit shared sae configuration nic-proxy-configuration ip resolution]
    user@host# set constraints constraints

Published: 2009-09-15

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.