Changing the Location of Data in the Directory

In most cases, you use the default configuration for the location of SRC data in the directory:

  • Administrator-defined configuration data—ou=staticConfiguration,ou=Configuration,o=Management,o=umc
  • Programmatically defined configuration data—ou=dynamicConfiguration,ou=Configuration,o=Management, o=umc

You can specify the full distinguished name (DN), or a DN relative to a base DN, identified as <base>.

You can change the location of data in the directory at the Expert CLI editing level.

Use the following configuration statements to change the location of data for a component in the directory:

slot number component-name initial {
static-dn static-dn ;
dynamic-dn dynamic-dn ;
}

To change the location of data in the directory:

  1. From configuration mode, access the configuration statement that specifies the configuration for a component on a slot.
    [edit]
    user@host# edit slot number nic initial

    For example:

    [edit]
    user@host# edit slot 0 nic initial
  2. (Optional) Change the location of administrator-defined configuration data in the directory
    [edit slot 0 nic initial]
    user@host# set static-dn static-dn
  3. (Optional) Change the location of programmatically defined configuration data in the directory.
    [edit slot 0 nic initial]
    user@host# set dynamic-dn dynamic-dn

Published: 2009-09-25

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.