• Downloads
• Configuring Initialization Scripts    

• Related Topics
• Configuring Initialization Scripts (C-Web Interface)
• Specifying Application Managers for the Policy Server
• Configuring the SAE to Interact with the JPS
• Specifying Initialization Scripts on the SAE
• Developing Router Initialization Scripts for JUNOSe Routers, JUNOS Routing Platforms, and Network Devices

Configuring Initialization Scripts

When the SAE establishes a connection with a policy server, it runs an initialization script to customize the setup of the connection.

Use the following configuration statement to configure the initialization script:

shared sae configuration driver scripts {

pcmm pcmm;

}

To configure initialization scripts for the SAE:

1. From configuration mode, access the configuration statement that configures the initialization scripts.

   user@host# edit shared sae configuration driver scripts

2. Specify the initialization script for a PCMM environment.

   [edit shared sae configuration driver scripts]

   user@host# set pcmm pcmm

   The script is run when the connection between a policy server and the SAE is established and again when the connection is dropped. For the JPS, we recommend setting this value to amIorPublisher.

---

Published: 2009-09-23

---

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.