[Contents] [Prev] [Next] [Index] [Report an Error]

Specifying Initialization Scripts on the SAE

Use the following configuration statements to specify initialization scripts for third-party devices:

shared sae configuration driver scripts {
extension-path extension-path ;
general general ;
}

To configure initialization scripts for third-party devices:

  1. From configuration mode, access the configuration statements that configure initialization scripts.
    user@host# edit shared sae configuration driver scripts
  2. Specify the initialization script for third-party devices.
    [edit shared sae configuration driver scripts]
    user@host# set general general
  3. Configure a path to scripts that are not in the default location, /opt/UMC/sae/lib.
    [edit shared sae configuration driver scripts]
    user@host# set extension-path extension-path
  4. (Optional) Verify your initialization script configuration.
    [edit shared sae configuration driver scripts]
user@host# show 
    
            
    
         
    5. 
      

      
Related Topics

      
      

      [Contents]
      [Prev]
      [Next]
      
      [Index]
      
      [Report an Error]
      


         

            

               
               Copyright © 2009, Juniper Networks, Inc.
                  All rights reserved.
                  	Trademark Notice.