[Contents] [Prev] [Next] [Index] [Report an Error]

Specifying Which NTP Server a C Series Controller Contacts on Startup

When you boot a C Series Controller, it issues an ntpdate request, which polls a network server to determine the local date and time. Configure a server that the system uses to determine the time when the system boots. Otherwise, NTP cannot synchronize with a time server if the server’s time is very far off the local system’s time.

To configure the NTP boot server:

  1. From configuration mode, access the configuration statement that configures NTP.
    [edit]
    user@host# edit system ntp
  2. Specify the address or hostname of the network NTP server.
    [edit system ntp]
    user@host# set boot-server address

    For example:

    [edit system ntp]
    user@host# set boot-server 192.0.2.20

Related Topics

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.