Configuring Service Scopes (C-Web Interface)

The tasks to configure a service scope are:

1. Adding Service Scopes (C-Web Interface)
2. Assigning Services and Mutex Groups to Service Scopes (C-Web Interface)
3. Assigning Service Scopes to VRs or Subscribers (C-Web Interface)

Adding Service Scopes (C-Web Interface)

To add a service scope:

1. Click Configure>Services.

   The Services pane appears.

2. From the Create new list, select Scope.
3. Enter a name for the new Scope, and click OK.

   The Scope: <name> pane appears.

4. Enter information as described in the Help text in the main pane, and click Apply.

Assigning Services and Mutex Groups to Service Scopes (C-Web Interface)

To assign services and mutex groups to a scope:

1. Click Configure, and expand Services.
2. Click the specified scope.

   The Scope: <name> pane appears.

3. From the Create new list, select Mutex Group or Service.
4. In the dialog box, type a name for the new mutex group or service, and click OK.

Assigning Service Scopes to VRs or Subscribers (C-Web Interface)

You can assign multiple service scopes to a VR or subscriber, and you can assign a service scope to multiple VRs and subscribers.

To assign a service scope:

1. Click Configure, and expand Shared.
2. Expand Network and the specified device.
3. Click the specified virtual router.

   The Virtual Router: <name> pane appears.

4. In the Scope box, select a virtual router as described in the Help text in the main pane, and click Apply.

Related Topics

• SRC PE Services and Policies Guide

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.