Table of Contents - SRC PE 3.2.x C-Web Configuration Guide

[Contents] [Prev] [Next] [Index] [Report an Error]

About the Documentation

SRC Documentation and Release Notes

Audience

Documentation Conventions

Obtaining Documentation

Documentation Feedback

Requesting Technical Support

Configuring C Series Controllers

Configuring Remote Access to a C Series Controller (C-Web Interface)

Overview of External Interfaces on a C Series Controller

Tunnel Interfaces
Ethernet Redundancy

Configuring Loopback Interfaces for IPv4 (C-Web Interface)

Configuring Loopback Interfaces for IPv6 (C-Web Interface)

Configuring Gigabit Ethernet Interfaces for IPv4 (C-Web Interface)

Configuring Gigabit Ethernet Interfaces for IPv6 (C-Web Interface)

Configuring Group Interfaces (C-Web Interface)

Configuring Tunnel Interfaces (C-Web Interface)

Configuring a Static Route to Devices on Other Networks (C-Web Interface)

Securing Connections Between a C Series Controller and Remote Hosts

Configuring a C Series Controller to Accept SSH Connections (C-Web Interface)

Configuring a C Series Controller to Accept Telnet Connections (C-Web Interface)

Configuring a C Series Controller to Accept NETCONF Connections (C-Web Interface)

Configuring NTP on C Series Controllers with the C-Web Interface

Specifying a Basic NTP Configuration on a C Series Controller (C-Web Interface)
Configuring NTP Client Mode for a C Series Controller (C-Web Interface)
Configuring an NTP Peer for a C Series Controller (C-Web Interface)
Configuring NTP Broadcast Mode on a C Series Controller (C-Web Interface)
Configuring NTP as a Multicast Client on a C Series Controller (C-Web Interface)
Specifying an Authentication Key for NTP on C Series Controllers (C-Web Interface)
Configuring NTP Authentication (C-Web Interface)

Configuring System Logging for a C Series Controller with the C-Web Interface

Overview of the C Series Controller Log Server

Message Groups
Severity Levels

Before You Configure System Logging (SRC CLI)

Saving System Log Messages to a File (C-Web Interface)

Sending System Log Messages to Other Servers (C-Web Interface)

Sending Notifications for System Log Messages to Users (C-Web Interface)

Installing Licenses for C Series Controllers (C-Web Interface)

Installing a Pilot License (C-Web Interface)
Installing Server Licenses (C-Web Interface)
Configuring License Manager for an SAE (C-Web Interface)

Monitoring License Usage (C-Web Interface)

Creating SRC License Usage Reports (C-Web Interface)
Sending SRC License Usage Reports to Administrators (C-Web Interface)
Monitoring SRC License Usage (C-Web Interface)

Configuring User Access to the SRC Software

Configuring User Access with the C-Web Interface

Overview of SRC User Accounts

Configuring Login Classes (C-Web Interface)

Configuring User Accounts (C-Web Interface)

Configuring Authentication for SRC User Accounts (C-Web Interface)

Configuring a Plain Text Password
Configuring SSH Authentication

Configuring a System Login Announcement (C-Web Interface)

Authenticating Users on a C Series Controller with the C-Web Interface

Configuring RADIUS and TACACS+ Authentication on a C Series Controller (C-Web Interface)
Configuring RADIUS Authentication (C-Web Interface)
Configuring TACACS+ Authentication (C-Web Interface)
Configuring Authentication Order
Removing an Authentication Method from the Authentication Order
Using Remote Template Accounts
Configuring a Local User Template

Managing Systems That Run the SRC Software

Configuring Static Host Mapping with the C-Web Interface

Overview of Static Host Mapping
Configuring Static Host Mapping with the C-Web Interface

Managing the Juniper Networks Database with the C-Web Interface

Enabling the Juniper Networks Database to Run in Standalone Mode (C-Web Interface)
Configuring the Juniper Networks Database to Run in Community Mode with the C-Web Interface
Securing the Juniper Networks Database with the C-Web Interface
Adding a Juniper Networks Database to an Established Community with the C-Web Interface
Promoting a Secondary Database to a Primary Role in a Configuration with One Primary Database with the C-Web Interface
Updating Data on a Juniper Networks Database with the C-Web Interface
Synchronizing Data on a Juniper Networks Database with the C-Web Interface
Loading Sample Data in to a Juniper Networks Database with the C-Web Interface
Securing Communications Between the Juniper Networks Database and SRC Modules and Components with the C-Web Interface
Recovering Data in a Community with One Primary Database and One Secondary Database with the C-Web Interface

Creating Custom SNMP Monitors (C-Web Interface)

SNMP Monitoring on C Series Controllers
Configuring SNMP Custom Monitors (C-Web Interface)

Configuring Network Components

Setting Up an SAE with the C-Web Interface

Initially Configuring the SAE with the C-Web Interface
Creating Grouped Configurations for the SAE (SRC CLI)
Configuring an SAE Group with the C-Web Interface
Configuring an SAE Group
Deleting Default Configurations Within an SAE Group
Configuring Local Properties for the SAE with the C-Web Interface
Configuring the RADIUS Local IP Address and NAS ID with the C-Web Interface
Configuring the Directory Location for SAE Data with the C-Web Interface
Starting the SAE with the C-Web Interface
Stopping the SAE with the C-Web Interface

Configuring the SAE with the C-Web Interface

SRC Data Storage

Configuring LDAP Access to Directory Data with the C-Web Interface

Configuring Access Through LDAPS to Service and Subscriber Data
Configuring Access to Subscriber Data
Configuring Access to Service Data
Configuring Access to Policy Data
Configuring Access to the Persistent Login Cache
Configuring the Location of Network Device Data
Configuring the SAE to Manage Third-Party Devices
Configuring SAE Properties for Global Default SNMP Communities for Use with JUNOSe Routers and JUNOS Routing Platforms
Enabling Automatic Discovery of Changes in SAE Configuration Data
Setting the Timeout and Number of Events for SAE Directory Eventing (C-Web Interface)

Storing Subscriber and Service Session Data

Session Store Files
Active and Passive Session Stores
Standby SAEs
Session Store File Rotation

Configuring the Session Store Feature on the C-Web Interface

Configuring Session Store Parameters for a Device Driver
Configuring Global Session Store Parameters (C-Web Interface)
Reducing the Size of Objects for the Session Store Feature

Configuring the Number of Threads for Sessions on the C-Web Interface

Classifying Interfaces and Subscribers (C-Web Interface)

Overview of Classification Scripts

How Classification Scripts Work
Interface Classification Scripts
Subscriber Classification Scripts
DHCP Classification Scripts
Sharing Information Among Classification Scripts

Overview of Configuring Classification Scripts

Subscriber Classifiers

DHCP Classifiers

Interface Classifiers

Classification Targets

Target Expressions

Classification Conditions

Glob Matching
Regular Expression Matching

Classifying Interfaces (C-Web Interface)

Interface Classification Conditions

Classifying Subscribers (C-Web Interface)

Subscriber Classification Conditions

Sending DHCP Options to the JUNOSe Router

Subscriber Classification Targets

Classifying DHCP Subscribers (C-Web Interface)

Syntax for DHCP Classification Targets

Selecting DHCP Parameters

DHCP Options Supported on the SAE

Creating DHCP Profiles (C-Web Interface)

Configuring the SAE for a PCMM Environment (C-Web Interface)

Configuring the SAE for a Cable Network Environment (C-Web Interface)
Configuring the SAE to Manage PCMM Devices (C-Web Interface)
Setting Up SAE Communities (C-Web Interface)
Configuring the SAE Community Manager with the C-Web Interface
Configuring SAE Properties for the Event Notification API (C-Web Interface)
Configuring PCMM Record-Keeping Server Plug-Ins (C-Web Interface)
Configuring CMTS-Specific RKS Plug-Ins (C-Web Interface)
Configuring Record-Keeping Server Peers for Plug-Ins (C-Web Interface)

Configuring and Starting the SNMP Agent (C-Web Interface)

Configuring the SDX SNMP Agent (C-Web Interface)
Configuring General Properties for the SDX SNMP Agent (C-Web Interface)
Configuring Initial Properties for the SDX SNMP Agent (C-Web Interface)
Configuring Directory Connection Properties for the SDX SNMP Agent (C-Web Interface)
Configuring Directory Monitoring Properties for the SDX SNMP Agent (C-Web Interface)
Configuring Logging Destinations for the SDX SNMP Agent (C-Web Interface)
Configuring JRE Properties
Configuring the SNMP Agent (C-Web Interface)
Configuring System Information for the SNMP Agent (C-Web Interface)
Configuring Access Control for SNMPv3 Users (C-Web Interface)
Configuring Authentication (C-Web Interface)
Configuring Encryption (C-Web Interface)
Configuring Access Control for Communities (C-Web Interface)
Configuring Access Control for the VACM (C-Web Interface)
Associating Security Names with a Community (C-Web Interface)
Defining Named Views (C-Web Interface)
Defining Access Privileges for an SNMP Group (C-Web Interface)
Assigning Security Names to Groups (C-Web Interface)
Configuring Notification Targets (C-Web Interface)
Configuring Performance Traps (C-Web Interface)
Configuring Event Traps (C-Web Interface)
Starting the SDX SNMP Agent (C-Web Interface)
Stopping the SDX SNMP Agent (C-Web Interface)
Monitoring the SDX SNMP Agent (C-Web Interface)

Configuring the NIC (C-Web Interface)

Before You Configure the NIC

Configuring the NIC (C-Web Interface)

Starting the NIC (C-Web Interface)

Reviewing and Changing Operating Properties for NIC (C-Web Interface)

Configuring NIC Replication (C-Web Interface)

Configuring a NIC Scenario (C-Web Interface)

Defining the NIC Configuration (C-Web Interface)
Configuring the SAE to Communicate with SAE Plug-In Agents for NIC Replication (C-Web Interface)

Testing a NIC Resolution (C-Web Interface)

Stopping a NIC Host on a C Series Controller (C-Web Interface)

Restarting the NIC (C-Web Interface)

Changing NIC Configurations (C-Web Interface)

Obtaining Interface Configuration for OnePopStaticRouteIp or OnePopVrfIp (C-Web Interface)

Overview of the Network Publisher
Before You Configure and Run the Network Publisher
Configuring the Network Publisher (C-Web Interface)
Configuring Information to Test the Network Publisher (C-Web Interface)
Reviewing the Information Collected from a JUNOS Routing Platform (C-Web Interface)

Using the C-Web Interface to Configure SRC Applications to Communicate with an SAE

Before You Configure a NIC Proxy
Configuring a NIC Proxy (C-Web Interface)
Configuring NIC Test Data (C-Web Interface)
Examples: Key Values for NIC Bindings

Configuring Admission Control (C-Web Interface)

Configuring SRC ACP (C-Web Interface)

Configuring Local Properties for SRC ACP (C-Web Interface)

Configuring Basic Local Properties for SRC ACP
Configuring Initial Properties for SRC ACP
Configuring Directory Connection Properties for SRC ACP
Configuring Initial Directory Eventing Properties for SRC ACP

Configuring the SAE for SRC ACP (C-Web Interface)

Configuring SRC ACP as an External Plug-In
Configuring Event Publishers for SRC ACP
Configuring the SAE to Monitor Interfaces for Congestion Points

Configuring SRC ACP Properties (C-Web Interface)

Configuring Logging Destinations for SRC ACP
Configuring SRC ACP Operation
Configuring CORBA Interfaces
Configuring SRC ACP Redundancy
Configuring Connections to the Subscribers’ Directory
Configuring Connections to the Services’ Directory
Configuring SRC ACP Scripts and Classification

Configuring SRC ACP to Manage the Edge Network (C-Web Interface)

Configuring Network Interfaces in the Directory
Configuring Bandwidths for Subscribers (Edge Network)
Assigning Network Interfaces to Subscribers
Configuring Bandwidths for Services

Configuring SRC ACP to Manage the Backbone Network (C-Web Interface)

Configuring Action Congestion Points

Configuring Congestion Points for Services

Configuring Congestion Points in the Directory

Assigning Interfaces to Congestion Points

Configuring Congestion Point Classification (C-Web Interface)

Configuring Targets and Criteria for Classification Scripts
Configuring Classification Script Contents for Classification Scripts

Defining a Congestion Point Profile (C-Web Interface)

Integrating Network Devices

Configuring the JPS (C-Web Interface)

Modifying the JPS Configuration (C-Web Interface)

Configuring General Properties for the JPS (C-Web Interface)
Specifying a Policy Server Identifier in Messages (C-Web Interface)
Configuring Logging Destinations (C-Web Interface)
Specifying Connections to the Application Managers (C-Web Interface)
Specifying Connections to RKSs (C-Web Interface)

Configuring RKS Pairs (C-Web Interface)

Configuring Connections for RKS Pairs (C-Web Interface)
Configuring RKS Pairs for Associated Application Managers (C-Web Interface)
Specifying Connections to CMTS Devices (C-Web Interface)

Modifying the Subscriber Configuration (C-Web Interface)

Configuring Subscriber IP Pools as IP Address Ranges (C-Web Interface)

Configuring Subscriber IP Pools as IP Subnets (C-Web Interface)

Configuring the SAE to Interact with the JPS (C-Web Interface)

Specifying Application Managers for the Policy Server (C-Web Interface)

Specifying Application Manager Identifiers for Policy Servers (C-Web Interface)

Adding Objects for Policy Servers to the Directory (C-Web Interface)

Configuring Initialization Scripts (C-Web Interface)

Enabling State Synchronization (C-Web Interface)

Using the NIC Resolver in PCMM Environments

Managing the JPS (C-Web Interface)

Starting the JPS (C-Web Interface)
Restarting the JPS (C-Web Interface)
Stopping the JPS (C-Web Interface)
Displaying JPS Status (C-Web Interface)

Using JUNOSe Routers in the SRC Network (C-Web Interface)

COPS Connection Between JUNOSe Routers and the SAE

Highly Available Connections to JUNOSe Routers

Adding JUNOSe Routers and Virtual Routers (C-Web Interface)

Detecting Operative JUNOSe Routers and Virtual Routers and Adding Them to the Network
Adding JUNOSe Routers Individually
Adding Virtual Routers Individually

Configuring the SAE to Manage JUNOSe Routers (C-Web Interface)

Using SNMP to Retrieve Information from JUNOSe Routers

How SNMP Obtains Information from Routers for the SRC Software
Configuring the SNMP Server on the JUNOSe Router
Configuring Global SNMP Communities in the SRC Module (C-Web Interface)

Specifying JUNOSe Router Initialization Scripts on the SAE (C-Web Interface)

Developing Router Initialization Scripts for JUNOSe Routers, JUNOS Routing Platforms, and Network Devices

Interface Object Fields
Required Methods
Example: Router Initialization Script

Accessing the Router CLI

Starting the SRC Client on a JUNOSe Router

Stopping the SRC Client on a JUNOSe Router

Monitoring Interactions Between the SAE and the JUNOSe Router

Troubleshooting Problems with Managing JUNOSe Routers

Viewing the State of JUNOSe Device Drivers (C-Web Interface)

Viewing Statistics for Specific JUNOSe Device Drivers (C-Web Interface)

Viewing Statistics for All JUNOSe Device Drivers (C-Web Interface)

Using JUNOS Routing Platforms in the SRC Network (C-Web Interface)

BEEP Connection Between JUNOS Routing Platforms and the SAE

Adding JUNOS Routing Platforms and Virtual Routers (C-Web Interface)

Overview of Adding JUNOS Routing Platforms and Virtual Routers
Adding Operative JUNOS Routing Platforms
Adding JUNOS Routers Individually
Adding Virtual Routers Individually

Configuring the SAE to Manage JUNOS Routing Platforms (C-Web Interface)

Configuring Secure Connections Between the SAE and JUNOS Routing Platforms

Manually Obtaining Digital Certificates

Obtaining Digital Certificates through SCEP

Adding the Server Certificate on the Routing Platform

Creating a Client Certificate for the Router

Adding the Client Certificate on the Router

Configuring the SAE to Use TLS

Configuring TLS on the SAE

SAE Verification of JUNOS Configuration Changes

Setting Up the SAE to Periodically Check JUNOS Configuration (C-Web Interface)

Using SNMP to Retrieve Information from JUNOS Routing Platforms and Other Network Devices

Developing Router Initialization Scripts for JUNOSe Routers, JUNOS Routing Platforms, and Network Devices

Interface Object Fields
Required Methods
Example: Router Initialization Script

Specifying JUNOS Router Initialization Scripts on the SAE (C-Web Interface)

Troubleshooting Problems with the SRC Software Process (C-Web Interface)

Adding Objects for CMTS Devices (C-Web Interface)

Adding Objects for CMTS Devices (C-Web Interface)
Creating Virtual Routers for the CMTS Device (C-Web Interface)

Integrating Third-Party Network Devices into the SRC Network (C-Web Interface)

Overview of Integrating Network Devices into the SRC Network

SAE Communities
Storing Session Data
Using Script Services to Provision Third-Party Devices

Logging In Subscribers and Creating Sessions

Assigned IP Subscribers
Login Interactions with Assigned IP Subscribers
Event Notification from an IP Address Manager
Login with Event Notification

Configuration Tasks for Integrating Third-Party Network Devices (C-Web Interface)

Setting Up Script Services

Adding Objects for Network Devices (C-Web Interface)

Adding a Router Object
Adding Virtual Router Objects

Setting Up SAE Communities (C-Web Interface)

Configuring the SAE Community Manager
Specifying the Community Manager in the SAE Device Driver
Configuring SAE Properties for the Event Notification API (C-Web Interface)
Specifying Initialization Scripts on the SAE

Using the NIC Resolver in Environments That Have Third-Party Devices (C-Web Interface)

Configuring Policies and Services

Configuring and Managing Policies (C-Web Interface)

Before You Configure SRC Policies

Creating a Worksheet

Naming Objects

Using the apply-groups Statement

Using Expressions

Policy Values

SAE to JUNOS Routing Platforms
SAE to JUNOSe Routers

Enabling the Policy Configuration on the C-Web Interface

Configuring Policy Folders (C-Web Interface)

Configuring Policy Groups (C-Web Interface)

Configuring Policy Lists (C-Web Interface)

Configuring Policy Rules (C-Web Interface)

Policy Management Overview
Adding a Policy Rule
Configuring Classify-Traffic Conditions (C-Web Interface)
Configuring Template Activation (C-Web Interface)

Enabling Expansion of JUNOSe Classify-Traffic Conditions (C-Web Interface)

Specifying the PCMM Classifier Type (C-Web Interface)

Specifying Port Access for Traffic Classification (C-Web Interface)

Creating a Classify-Traffic Condition (C-Web Interface)

Configuring Source Networks (C-Web Interface)

Configuring Source Grouped Networks (C-Web Interface)

Configuring Destination Networks (C-Web Interface)

Configuring Destination Grouped Networks (C-Web Interface)

Configuring Protocol Conditions (C-Web Interface)

Configuring Protocol Conditions with Ports (C-Web Interface)

Configuring Protocol Conditions with Parameters (C-Web Interface)

Configuring TCP Conditions (C-Web Interface)

Configuring ICMP Conditions (C-Web Interface)

Configuring IGMP Conditions (C-Web Interface)

Configuring IPSec Conditions (C-Web Interface)

Configuring ToS Byte Conditions (C-Web Interface)

Configuring JUNOS Filter Conditions (C-Web Interface)

Configuring Application Protocol Conditions (C-Web Interface)

Configuring QoS Conditions with the C-Web Interface

Configuring Actions (C-Web Interface)

Configuring Color Mark-Actions (C-Web Interface)
Configuring DOCSIS Actions (C-Web Interface)
Configuring Filter Actions (C-Web Interface)
Configuring FlowSpec Actions (C-Web Interface)
Configuring Forward Actions (C-Web Interface)
Configuring Forwarding Class Actions (C-Web Interface)
Configuring Gate Spec Actions (C-Web Interface)
Configuring Loss Priority Actions (C-Web Interface)
Configuring Mark Actions (C-Web Interface)
Configuring NAT Actions (C-Web Interface)
Configuring Next-Hop Actions (C-Web Interface)
Configuring Next-Interface Actions (C-Web Interface)
Configuring Next-Rule Actions (C-Web Interface)
Configuring Policer Actions (C-Web Interface)
Configuring QoS Profile Attachment Actions (C-Web Interface)
Configuring Rate-Limit Actions (C-Web Interface)
Configuring Reject Actions (C-Web Interface)
Configuring Routing Instance Actions (C-Web Interface)
Configuring Scheduler Actions (C-Web Interface)
Configuring Drop Profiles (C-Web Interface)
Configuring Service Class Name Actions (C-Web Interface)
Configuring Stateful Firewall Actions (C-Web Interface)
Configuring Traffic-Class Actions (C-Web Interface)
Configuring Traffic-Mirror Actions (C-Web Interface)
Configuring Traffic-Shape Actions (C-Web Interface)

Configuring Local and Global Parameters (C-Web Interface)

Viewing Predefined Global Parameters (C-Web Interface)
Configuring Global Parameters (C-Web Interface)
Configuring Local Parameters (C-Web Interface)
Viewing Runtime Parameters (C-Web Interface)

Configuring Services (C-Web Interface)

Before You Configure SRC Services

Enabling the Service Configuration on the C-Web Interface

Adding a Normal Service (C-Web Interface)

Setting Parameter Values for Services (C-Web Interface)

Configuring Service Fragments for an Aggregate Service (C-Web Interface)

Configuring Timers for Aggregate Services (C-Web Interface)

Adding an Infrastructure Service (C-Web Interface)

Configuring Script Services (C-Web Interface)

Adding a Mutex Group (C-Web Interface)

Configuring Service Scopes (C-Web Interface)

Adding Service Scopes (C-Web Interface)
Assigning Services and Mutex Groups to Service Scopes (C-Web Interface)
Assigning Service Scopes to VRs or Subscribers (C-Web Interface)

Example: Configuring a Limited Set of Services for Organizations (C-Web Interface)

Example: Customizing Generic Services to Particular Regions (C-Web Interface)

Scheduling Services (C-Web Interface)

Setting the Action Threshold and Preparation Time (C-Web Interface)

Authorizing Scheduled Services (C-Web Interface)

Defining an Authorization Plug-In for a Scheduled Service in the Global Configuration (C-Web Interface)
Defining an Authorization Plug-In for a Scheduled Service in the Service Scope (C-Web Interface)

Adding a Service Schedule (C-Web Interface)

Adding a Service Schedule for Scopes (C-Web Interface)
Adding a Service Schedule for Services (C-Web Interface)
Adding a Service Schedule for Retailers (C-Web Interface)
Adding a Service Schedule for Enterprises (C-Web Interface)
Adding a Service Schedule for Subscribers in an Enterprise (C-Web Interface)
Setting the Time Schedule (C-Web Interface)
Setting the Action (C-Web Interface)
Defining Attributes for Service Activation (C-Web Interface)

Example: Configuring Different Service Tiers for Different Days (C-Web Interface)

Example: Configuring a Service to Be Active During Nonwork Hours (C-Web Interface)

Example: Configuring a Service to Be Available for a Specified Interval (C-Web Interface)

Managing Tiered and Premium Services with QoS on JUNOSe Routers (C-Web Interface)

Overview of QoS on JUNOSe Routers

Dynamically Managing QoS Profiles

How QoS Profile Tracking Works

Identifying QoS Services

Determining the QoS Profile

Setting Up Policy Groups

Policy Group for QoS Profile Attachment Service

Setting Up Services

Reestablishing Default QoS Profile

Example: How QTP Activates a QoS Service

Configuring QoS Profile-Tracking Plug-Ins (C-Web Interface)

Configuring Search Filters for QoS Profile-Tracking Plug-Ins

Configuring Subscribers and Subscriptions

Configuring Subscriber–Related Properties on the SAE (C-Web Interface)

Configuring the Length of Time That MAC Addresses Remain in SAE Cache (C-Web Interface)
Identifying a Profile for Unauthenticated Subscribers (C-Web Interface)
Configuring Interim Accounting for Services and Subscribers (C-Web Interface)
Avoiding Overcharges for Sessions That Time Out (C-Web Interface)
Allowing Multiple Logins from the Same IP Address (C-Web Interface)
Authenticating Registered Username/Password Pairs (C-Web Interface)
Configuring Timers for Session Reactivation (C-Web Interface)

Configuring Internal, External, and Synchronization Plug-Ins (C-Web Interface)

Creating Plug-In Instances (C-Web Interface)
Creating a Plug-In Instance for All SAE Configurations (C-Web Interface)
Creating a Plug-In Instance for an SAE Group
Configuring Internal Plug-Ins (C-Web Interface)
Configuring the SAE for External Plug-Ins (C-Web Interface)
Configuring the State Synchronization Plug-In Interface (C-Web Interface)

Configuring Accounting and Authentication Plug-Ins (C-Web Interface)

Creating RADIUS Peers

Types of Tracking Plug-Ins

Configuring Flat File Accounting Plug-Ins (C-Web Interface)

Configuring Headers for Flat File Accounting Plug-Ins (C-Web Interface)

Configuring Basic RADIUS Accounting Plug-Ins (C-Web Interface)

Configuring Flexible RADIUS Accounting Plug-Ins (C-Web Interface)

Configuring Custom RADIUS Accounting-Plug-Ins (c-Web Interface)

Types of Authentication Plug-Ins

Limiting Subscribers on Router Interfaces (C-Web Interface)

Configuring Basic RADIUS Authentication Plug-Ins (C-Web Interface)

Configuring Flexible RADIUS Authentication Plug-Ins (C-Web Interface)

Configuring Custom RADIUS Authentication Plug-Ins (C-Web Interface)

Configuring LDAP Authentication Plug-Ins (C-Web Interface)

Configuring UDP Ports for RADIUS Plug-Ins (C-Web Interface)

Configuring Global UDP Ports (C-Web Interface)

Overview of Flexible RADIUS Plug-Ins

Using Default RADIUS Templates
Naming RADIUS Attribute Instances
Defining RADIUS Attributes
Standard RADIUS Attributes
Juniper Networks VSAs

Configuring a RADIUS Packet Template (C-Web Interface)

Using Flexible RADIUS Packet Definitions

Setting Values in Authentication Response Packets
Selecting IP Address Pools Using DHCP Response Packets

Configuring Global and Default Retailer Event Publishers (C-Web Interface)

Configuring Subscribers and Subscriptions (C-Web Interface)

Enabling the Subscriber and Subscription Configuration (C-Web Interface)
Adding Subscribers (C-Web Interface)
Adding Retailers (C-Web Interface)
Configuring Administrative Information for Retailers (C-Web Interface)
Adding Subscriber Folders (C-Web Interface)
Adding Residential Subscribers (C-Web Interface)
Configuring Administrative Information for Residential Subscribers (C-Web Interface)
Adding Enterprises (C-Web Interface)
Configuring Administrative Information for Enterprise Subscribers (C-Web Interface)
Adding Sites (C-Web Interface)
Adding Devices as Subscribers (C-Web Interface)
Adding Managers (C-Web Interface)
Configuring Subscriptions (C-Web Interface)
Allowing Multiple Subscriptions to the Same Service per Subscriber
Configuring Accesses (C-Web Interface)

Configuring External Subscriber Events with the C-Web Interface

Overview of External Subscriber Monitor

Configuring External Subscriber Monitor (C-Web Interface)

Configuring Basic Local Properties for External Subscriber Monitor
Configuring Initial Properties for External Subscriber Monitor
Configuring Directory Connection Properties for External Subscriber Monitor
Configuring Eventing Properties for External Subscriber Monitor
Configuring Logging Destinations for External Subscriber Monitor

Configuring the NIC Proxy for the Pseudo-RADIUS Server (C-Web Interface)

Configuring Resolution Information for a NIC Proxy
Changing the Configuration for the NIC Proxy Cache
Configuring a NIC Proxy for NIC Replication

Configuring the Pseudo-RADIUS Server for External Subscriber Monitor (C-Web Interface)

Configuring the Client Secret for the External Subscriber Monitor (C-Web Interface)

Configuring Event Notification for the External Subscriber Monitor (C-Web Interface)

Starting External Subscriber Monitor with the C-Web Interface (C-Web Interface)

Stopping External Subscriber Monitor with the C-Web Interface (C-Web Interface)

Configuring Traffic Redirection (C-Web Interface)

Configuring the Redirect Server (C-Web Interface)
Configuring General Properties for the Redirect Server (C-Web Interface)
Configuring a Connection Between the Redirect Server and the Directory (C-Web Interface)
Defining Traffic to Transmit to the Redirect Server (C-Web Interface)
Changing the Number of Requests That the Redirect Server Accepts (C-Web Interface)
Specifying Extensions for Files That the Redirect Server Accepts (C-Web Interface)
Configuring the DNS Server for the Redirect Server (C-Web Interface)
Configuring the Redirect Server to Support HTTP Proxies (C-Web Interface)
Configuring a Redundant Redirect Server (C-Web Interface)
Configuring Logging for the Redirect Server
Changing the Configuration for the Redirect Server
Assessing Load for Redirect Server (C-Web Interface)

Index

Index

[Contents] [Prev] [Next] [Index] [Report an Error]