[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Logging Destinations to Send Messages to the System Logging Facility (SRC CLI)

Use the following configuration statements to configure system logging for IMS:

slot number ims logger name ...
slot number ims logger name syslog {
filter filter;
host host;
facility facility;
format format;
}

To configure logging destinations to send log messages to the system logging facility:

  1. From configuration mode, access the statement that configures the name and type of logging destination. In this sample procedure, the logging destination called log2 is configured.
    user@host# edit slot 0 ims logger log2 syslog
  2. Specify the properties for the logging destination.
    [edit slot 0 ims logger log2 syslog]
    user@host# set ?

    For more information about configuring properties for the logging destination, see Configuring System Logging (SRC CLI).

  3. (Optional) Verify your configuration.
    [edit slot 0 ims logger log2 syslog] 
user@host# show 
    
            
    
         
    4. 
      

      
Related Topics

      
      

      [Contents]
      [Prev]
      [Next]
      
      [Index]
      
      [Report an Error]
      


         

            

               
               Copyright © 2009, Juniper Networks, Inc.
                  All rights reserved.
                  	Trademark Notice.