Viewing Power Status of a Controller Using IPMI

You can view IPMI power information for the controller you are currently logged on to and for a remote controller. You must be logged in as a root user.

To display power status (on or off) of the local controller using IPMI:

1. Log in as root user.

   SRC-PE Release 3.1 [R.3.1.0-12]

   login: root

2. Enter the password.

   Password: password

   You are now logged in as root user.

3. Access the CLI.

   [root@host ~]# cli

   --- SRC CLI 3.1 build CLI.R.3.1.0.012

   (c) 2005-2008 Juniper Networks Inc.

   root@host>

4. Enter the show ipmi power command.

   For example:

   
   

   root@host>show ipmi power

   Chassis Power is on

To display power status information on a remote controller using IPMI:

1. Log in as root user.
2. Enter the show ipmi host power command.

   root@host>show ipmi host host user user power

   • host—IP address of remote host IPMI interface
   • user—IPMI username configured in the remote host

   For example:

   root@host>show ipmi host 10.10.10.30 user johndoe power

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.