[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Table of Contents
- About the Documentation
-
- SRC Documentation and Release Notes
- Audience
- Documentation Conventions
-
- Obtaining Documentation
- Documentation Feedback
- Requesting Technical Support
- Product Overview
-
- C Series Controller Overview
-
- System Description
- C Series Controller Models
- C Series Model Components
- Network Management Tools
-
- CLI Management
- SNMP MIB Management
- Initial Installation
-
- Unpacking and Inspecting the C Series Controller
-
- Before You Begin
- Unpacking the Units
- Inspecting System Components and Accessories
- If You Detect or Suspect Damage
- Contacting Juniper Networks
- The Next Step
- Installing and Cabling the C Series Controller
-
- Before You Begin
- Freestanding Installation
- Rack-Mounted Installation
-
- Installation Guidelines
- Preparing the Equipment Racks
- Installing the System
- Cabling the System
-
- Cabling the Management Console
-
- Management Ports
-
- Connecting to the Network
- Connecting to
a Console Terminal
- Cabling Ethernet Interfaces
- Cabling the System for Power
- The Next Step
- Powering Up the C Series Controller
-
- Powering Up
- Status LEDs
- The Next Step
- Setting the Initial Configuration
-
- Configuration Overview
- Setting Up Management Access and Logging In
- Configuring the Juniper Networks Database
- Configuring Hostname and Domain Parameters
- Configuring the System for Remote Access
- Configuring the System to Accept SSH and Telnet Connections
- Adding an Admin User Account
- The Next Step
- Hardware Maintenance Procedures and Specifications
-
- Maintaining the System
-
- Required Tools and Items
- Storing Modules and Components
- Cleaning the System
- Installing or Replacing an SFP
-
- Tools and Parts Required
- Removing an SFP
- Installing an SFP
- Removing and Installing a Fan
- Removing and Installing a Power Supply Module
- Removing and Installing a Hard Drive
- System Specifications
-
- C2000 Model Specifications
- C4000 Model Specifications
- Managing RAID Disks on a C Series Controller
-
- C Series Controller Data Storage
- Managing Disks in a C Series Controller
-
- Replacing or Swapping a Disk
- Reinitializing an Active Disk
- Viewing Information About Disks on a C Series Controller
- Configuring IPMI on a C Series Controller (SRC CLI)
-
- Overview of IPMI
- Commands to Manage an IPMI Interface
- Configuring IPMI with the SRC CLI
- Viewing IPMI Chassis Information
- Viewing Power Status of a Controller Using IPMI
- Powering a Controller On and Off Using IPMI
- Viewing IPMI User Accounts
- Creating IPMI User Accounts
- Connecting to a Serial Console Using IPMI Serial over LAN (SOL)
- Disconnecting from a Serial Console Using IPMI Serial over
LAN (SOL)
- Configuring IPMI on a C Series Controller (C-Web Interface)
-
- Overview of IPMI
- Configuring IPMI with the C-Web Interface
- Viewing IPMI User Accounts with the C-Web Interface
- Creating an IPMI User Account with the C-Web Interface
- Deleting an IPMI User Account with the C-Web Interface
- Renaming an IPMI User Account with the C-Web Interface
- Installation Guidelines and Requirements
-
- Your Preinstallation Responsibilities
- Environmental Requirements
- Regulatory Compliances
- Safety Notices
-
- Lithium Battery
- Power Disconnection
- Power Cable Warning
- Power Cable Warning (Japanese)
- Working with Lasers
- VCCI Compliance
- Safety Guidelines
- Equipment Rack Requirements
-
- Mechanical Requirements
- Space Requirements
- Proper Rack Installation
- Cabling Recommendations
- Product Reclamation and Recycling Program
- Hardware Compliance
-
- Federal Communications Commission (FCC) Statement
- FCC Requirements for Consumer Products
- Food and Drug Administration, Center for Devices and Radiological
Health
- Canadian Department of Communications Radio Interference Regulations
- Réglement sur le brouillage radioélectrique du
ministère des communications
- Industry Canada Notice CS-03
- Avis CS-03 d'Industrie Canada
- D.O.C. Explanatory Notes: Equipment Attachment Limitations
- Notes explicatives du ministère des Communications:
limites visant les accessoires
- EC Declaration of Conformity
- Voluntary Control Council for Interference (VCCI) Statement
for Japan
- Contacting Customer Support and Returning Hardware
-
- Contacting Customer Support
- Return Procedure
- Locating Component Serial Numbers
- Information You Might Need to Supply to JTAC
- Tools and Parts Required
- Returning Products for Repair or Replacement
-
- Packing Instructions for Returning a Chassis
- Declaration of Conformity
-
- Declaration of Conformity – C2000 Controller
- Declaration of Conformity – C4000 Controller
- Index
-
- Index
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
