Configuring Event Notification for External Subscriber Monitor

Use the following configuration statements to configure External Subscriber Monitor as a RADIUS accounting server:

slot number external-subscriber-monitor event-notification {
event-threads event-threads;
event-thread-idle-timeout event-thread-idle-timeout;
event-retry-timeout event-retry-timeout;
event-retry-interval event-retry-interval;
session-timeout session-timeout;
}

To configure event notification

  1. From configuration mode, access the configuration statement that configures the event notification.
    user@host# edit slot 0 external-subscriber-monitor event-notification
  2. (Optional) Specify the maximum number of concurrent threads in a pool for event handlers.
    [edit slot 0 external-subscriber-monitor event-notification
    user@host# set event-threads event-threads
  3. (Optional) Specify the time to keep an event handler alive for reuse.
    [edit slot 0 external-subscriber-monitor event-notification
    user@host# set event-thread-idle timeout event-thread-idle-timeout
  4. (Optional) Specify the maximum retry time before an event is discarded.
    [edit slot 0 external-subscriber-monitor event-notification]
    user@host# set event-retry-timeout event-retry-timeout.
  5. (Optional) Specify the time to wait before the server retries failed events.
    [edit slot 0 external-subscriber-monitor event-notification]
    user@host# set event-retry-interval event-retry-interval
  6. Specify the keepalive time for a RADIUS subscriber or service.
    [edit slot 0 external-subscriber-monitor event-notification]
    user@host# set session-timeout session-timeout

Published: 2009-09-15

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.