• Downloads
• Configuring JUNOS Routing Platforms to Interact with the SAE    

• Related Topics
• Specifying Router Initialization Scripts on the SAE
• Configuring the JUNOS Routing Platform to Apply Changes It Receives from the SAE
• Disabling Interactions Between the SAE and JUNOS Routing Platforms
• Monitoring Interactions Between the SAE and JUNOS Routing Platforms

Configuring JUNOS Routing Platforms to Interact with the SAE

To configure the JUNOS routing platform to interact with the SAE:

1. Include the following statements at the [edit system services service-deployment] hierarchy level.

   [edit system services service-deployment]

   servers server-address {

   port port-number;

   }

   source-address source-address;

2. Use the following guidelines for the variables in these statements.

• server-address —Specifies the IP address of the host on which you install the SAE. Be sure this setting matches the corresponding value in the SAE configuration.

• port-number— Specifies the port number for the SAE. Be sure this setting matches the corresponding value in the SAE configuration.

• source-address —(Optional) Specifies the IP address of the source that sends traffic to the SAE.

---

Published: 2009-09-15

---

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.