Specifying Router Initialization Scripts on the SAE

Use the following configuration statements to specify router initialization scripts for JUNOS routing platforms:

shared sae configuration driver scripts {
extension-path extension-path ;
general general ;
junos junos ;
}

To configure router initialization scripts for JUNOS routing platforms:

  1. From configuration mode, access the configuration statements that configure router initialization scripts. In this sample procedure, the scripts are configured in the west-region group.
    user@host# edit shared sae group west-region configuration driver scripts
  2. Specify the router initialization script for JUNOS routing platforms.
    [edit shared sae group west-region configuration driver scripts]
    user@host# set junos junos
  3. Configure a router initialization script that can be used for all types of routers that the SRC module supports.
    [edit shared sae group west-region configuration driver scripts]
    user@host# set general general
  4. Configure a path to router initialization scripts that are not in the default location, /opt/UMC/sae/lib.
    [edit shared sae group west-region configuration driver scripts]
    user@host# set extension-path extension-path
  5. (Optional) From operational mode, verify your router initialization script configuration.
    [edit shared sae group west-region configuration driver scripts]
user@host# show
extension-path ;
junos iorPublisher;

Published: 2009-09-15

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.