Configuring CMTS-Specific RKS Plug-Ins (SRC CLI)

You can configure an RKS plug-in for specific CMTS devices. When there are events for the CMTS device, the SAE sends the events to the specified plug-in.

Use the following configuration statement to assign a CMTS-specific RKS plug-in.

shared sae configuration driver pcmm cmts-specific-rks-plug-ins name {
rks-plug-in rks-plug-in ;
}

To configure a CMTS-specific RKS plug-in:

  1. From configuration mode, access the configuration statements for RKS plug-ins. In this sample procedure, west-region is the name of the SAE group, and cmtsPlugin is the name of the plug-in assignment.
    user@host# edit shared sae group west-region configuration driver pcmm cmts-specific-rks-plug-ins cmtsPlugin
  2. Specify the name of the CMTS-specific RKS plug-in.
    [edit shared sae group west-region configuration driver pcmm cmts-specific-rks-plug-ins cmtsPlugin]
    user@host# set rks-plug-in rks-plug-in
  3. (Optional) Verify your configuration. 
    [edit shared sae group west-region configuration driver pcmm cmts-specific-rks-plug-ins cmtsPlugin]
user@host# show
rks-plug-in rksPlugin;
    
                        
    
                     
    4. 
                  

                  

                     

                     
Published: 2009-09-23

                  

               

            

         

      

   
Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.