Configuring Access to Service Data

Use the following configuration statements to configure access to service data:


                        
                           shared sae configuration ldap service-data {
                           server-address  server-address ;
                           
                           dn dn; 
                           authentication-dn  authentication-dn ;
                           
                           password  password ;
                           
                           directory-eventing; 
                           polling-interval  polling-interval ;
                           
                           (ldaps); 
                           }

To configure SAE access to service data:

From configuration mode, access the configuration statement that configures SAE access to service data in the directory. In this sample procedure, the service data is configured in the se-region group.
user@host# edit shared sae group se-region configuration ldap service-data
(Optional) Specify the directory server that stores service data.
[edit shared sae group se-region configuration ldap service-data] user@host# set server-address server-address
Specify the subtree in the directory where service data is cached.
[edit shared sae group se-region configuration ldap service-data] user@host# set dn dn
(Optional) Specify the DN that the SAE uses to authenticate access to the directory server.
[edit shared sae group se-region configuration ldap service-data] user@host# set authentication-dn authentication-dn
(Optional) Specify the password used to authenticate access to the directory server.
[edit shared sae group se-region configuration ldap service-data] user@host# set password password
(Optional) Enable or disable automatic discovery of changes to service data.
[edit shared sae group se-region configuration ldap service-data] user@host# set directory-eventing
Set the frequency for checking the directory for updates.
[edit shared sae group se-region configuration ldap service-data] user@host# set polling-interval polling-interval
Enable LDAPS as the secure protocol for connections to the server that stores service data.
edit shared sae group se-region configuration ldap service-data] user@host# set ldaps

(Optional) Verify your configuration.

[edit shared sae group se-region configuration ldap service-data]
user@host# show
server-address 10.10.45.3;
dn <base>;
authentication-dn <base>;
password ********;
directory-eventing;
polling-interval 30;
ldaps;

Configuring Access to Service Data

Published: 2009-09-15