Configuring IGMP Conditions (SRC CLI)

Use the following configuration statements to add IGMP conditions to a classify-traffic condition:

policies group name list name rule name traffic-condition name igmp-condition {
protocol protocol ;
protocol-operation protocol-operation ;
ip-flags ip-flags;
ip-flags-mask ip-flags-mask ;
fragment-offset fragment-offset ;
packet-length packet-length ;
igmp-type igmp-type ;
}

Because the protocol is already set to IGMP, do not change the protocol or protocol-operation options.

To add IGMP conditions to a classify-traffic condition:

  1. From configuration mode, enter the IGMP configuration. For example:
    user@host# edit policies group junose list pl rule pr traffic-condition ctc igmp-condition
  2. (Optional) Configure the value of the IP flags field in the IP header.
    [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]
    user@host# set ip-flags ip-flags
  3. (Optional) Configure the mask that is associated with the IP flag.
    [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]
    user@host# set ip-flags-mask ip-flags-mask
  4. (Optional) Configure the value of the fragment offset field.
    [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]
    user@host# set fragment-offset fragment-offset
  5. (Optional) Configure the packet length on which to match. The length refers only to the IP packet, including the packet header, and does not include any layer 2 encapsulation overhead.
    [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]
    user@host# set packet-length packet-length
  6. (Optional) Configure the IGMP packet type on which to match.
    [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]
    user@host# set igmp-type icmp-type
  7. (Optional) Verify the IGMP condition configuration.
    [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]
user@host# show 
protocol igmp;
protocol-operation 1;
ip-flags 0;
ip-flags-mask 0;
fragment-offset 0;
igmp-type igmpType;
    
                        
    
                     
    8. 
                  

                  

                     

                     
Published: 2009-09-22

                  

               

            

         

      

   
Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.