Subscribing to an Aggregate Service from a JUNOSe Router

You subscribe to an aggregate service that policy-routes traffic or one that mirrors traffic to an IDP sensor from a JUNOSe router.

To create a subscription to an aggregate service:

1. In SDX Admin, under Users select a retailer, and then create a subscriber folder for router subscribers.
2. In the folder for router subscribers, create a router subscriber for each router.

   For sample router subscriptions, see ou=routers, retailername=SP-IDP, o=Users, o=umc in the sample data.

3. Create a subscription to an aggregate service in the folder that includes the router subscribers.

   For the sample service CheckForAttacks, to which router subscribers subscribe, see serviceName=CheckForAttacks, ou=routers, retailername=SP-IDP, o=Users, o=umc in the sample data.

4. For policy-based routing to an IDP sensor from a JUNOSe router:
   1. Under the retailer, create a subscriber folder for the core interfaces.
   2. In the interfaces folder, create one subscriber that is shared by all JUNOSe interfaces that transmit traffic to the network core.

   See routerName=idp, ou=interfaces, retailerName=SP-IDP, o-Users, o=umc in the sample data.

Figure 15 shows the SDX Admin navigation pane with the router and interface subscribers included in the sample data.

Figure 15: Router and Interface Subscriptions for JUNOSe Routers

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.