[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring Dynamic Profile Actions (SRC CLI)

Use this action to install existing dynamic profiles. You can configure dynamic profile actions for devices such as the MX Series routers.

The profile name must match a dynamic profile configured on the device, and the variable name must match a variable configured for the dynamic profile.

Use the following configuration statements to configure a dynamic profile action:

policies group name list name rule name dynamic-profile name {
profile-name profile-name;
description description;
}
policies group name list name rule name dynamic-profile name variables name {
value value;
type type;
}

To configure a dynamic profile action:

  1. From configuration mode, enter the dynamic profile action configuration. In this sample procedure, dp is the name of the dynamic profile action.
    user@host# edit policies group ise list l1 rule r1 dynamic-profile dp
  2. Enter the profile name to activate.
    [edit policies group ise list l1 rule r1 dynamic-profile dp]
    user@host# set profile-name profile-name
  3. (Optional) Enter a description for the dynamic profile action.
    [edit policies group ise list l1 rule r1 dynamic-profile dp]
    user@host# set description description
  4. From configuration mode, enter the parameters used by the profile.
    user@host# edit policies group ise list l1 rule r1 dynamic-profile dp variables name

    For example:

    user@host# edit policies group ise list l1 rule r1 dynamic-profile dp variables upstreamBandwidth
  5. (Optional) Configure the value for the variable.
    [edit policies group ise list l1 rule r1 dynamic-profile dp variables name]
    user@host# set value value

    For example:

    [edit policies group ise list l1 rule r1 dynamic-profile dp variables upstreamBandwidth]
    user@host# set value rateParameter
  6. (Optional) Configure the variable type. Variable types are mapped to parameter types.
    [edit policies group ise list l1 rule r1 dynamic-profile dp variables name]
    user@host# set type type

    For example:

    [edit policies group ise list l1 rule r1 dynamic-profile dp variables upstreamBandwidth]
    user@host# set type rate

Related Topics

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.