Configuring the SAE to Use TLS

To configure the SAE to accept TLS connections, enter a port number with the set beep-server-port command in the JUNOS router driver configuration.

See Configuring the SAE to Manage JUNOS Routing Platforms .

Related Topics

• Configuring the SAE to Use TLS
• Configuring TLS on the SAE
• Configuring JUNOS Routing Platforms to Interact with the SAE
• Monitoring Interactions Between the SAE and JUNOS Routing Platforms

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.