[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring TLS on the SAE

Use the following configuration statements to configure TLS on the SAE:


            
               shared sae configuration driver junos security {
               need-client-authentication; 
               certificate-identifier private-key; 
               }

To configure TLS on the SAE:

From configuration mode, access the configuration statement that configures security for the JUNOS TLS connection. In this sample procedure, the JUNOS driver is configured in the west-region group.
user@host# edit shared sae group west-region configuration driver junos security
(Optional) Specify whether or not the SAE requests a client certificate from the router when a connection to the router is established.
[edit shared sae group west-region configuration driver junos security] user@host# set need-client-authentication
Specify the name of certificate to be used for TLS communications.
[edit shared sae group west-region configuration driver junos security] user@host# set certificate-identifier private-key

(Optional) Verify your TLS configuration.

[edit shared sae group west-region configuration driver junos security]
user@host# show 
need-client-authentication;
certificate-identifier privatekey;

Configuring TLS on the SAE

Related Topics