Adding Virtual Router Objects

Use the following configuration statements to add a virtual router:


            
               shared network device name virtual-router  name  {
               
               sae-connection [ sae-connection ...]; 
               
               snmp-read-community  snmp-read-community ; 
               
               snmp-write-community  snmp-write-community ; 
               
               scope [ scope ...]; 
               
               tracking-plug-in [ tracking-plug-in ...];
               
               }

To add a virtual router:

From configuration mode, access the configuration statements for virtual routers. You must specify the name of a device with lowercase characters. This sample procedure uses proxy_device as the name of the router object. For third-party devices, use the name default for the virtual router.


                  
                     user@host# edit shared network device proxy_device
                           virtual-router default

Specify the addresses of SAEs that can manage this router. This step is required for the SAE to work with the router.


                  
                     [edit shared network device proxy_device virtual-router
                        default] 
                     
                      user@host# set sae-connection [ sae-connection ...]

To specify the active SAE and the redundant SAE, enter an exclamation point (!) after the hostname or IP address of the connected SAE. For example:


                  
                     [edit shared network device proxy_device virtual-router
                        default]
                     
                     user@host# set sae-connection [sae1! sae2!]

(Optional) Specify an SNMP community name for SNMP read-only operations for this virtual router.


                  
                     [edit shared network device proxy_device virtual-router
                        default] 
                     
                      user@host#  set snmp-read-community  snmp-read-community

(Optional) Specify an SNMP community name for SNMP write operations for this virtual router.


                  
                     [edit shared network device proxy_device virtual-router
                        default] 
                     
                      user@host#  set snmp-write-community  snmp-write-community

(Optional) Specify service scopes assigned to this virtual router. The scopes are available for subscribers connected to this virtual router for selecting customized versions of services.


                  
                     [edit shared network device proxy_device virtual-router
                        default] 
                     
                      user@host#  set scope [ scope ...]

(Optional) Specify the plug-ins that track interfaces that the SAE manages on this virtual router.


                  
                     [edit shared network device proxy_device virtual-router
                        default] 
                     
                      user@host#  set tracking-plug-in [ tracking-plug-in ...]

(Optional) Verify your configuration.

[edit shared network device proxy_device virtual-router default] 
user@host# show 
sae-connection 10.8.221.45;
snmp-read-community ********;
snmp-write-community ********;
scope POP-Toronto;
tracking-plug-in flexRadius;

Adding Virtual Router Objects

Related Topics