Configuring Resolution Information for a NIC Proxy (SRC CLI)

Use the following statements to configure resolution information for a NIC proxy:


            
               nic-proxy-configuration name resolution {
               
               resolver-name resolver-name; 
               
               key-type key-type; 
               
               value-typevalue-type; 
               
               expect-multiple-values; 
               constraints constraints; 
               
               }

To configure resolution information for a NIC proxy:

From configuration mode, access the configuration statement that specifies the NIC proxy configuration.


                  
                     [edit]
                     user@host# component-hierarchy nic-proxy-configuration  name  resolution

For example:


                  
                     [edit]
                     user@host# edit shared sae configuration nic-proxy-configuration
                           ip resolution

Specify the NIC resolver that this NIC proxy uses.


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set resolver-name resolver-name

This resolver must be the same as one that is configured on the NIC host. For example:


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set resolver-name /realms/ip/A1

Specify the NIC data type that the key provides for the NIC resolution.


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set key-type key-type

For example:


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set key-type ip

To qualify data types, enter a qualifier within parentheses after the data type; for example, to specify username as a qualifier for the key LoginName:


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set key-type LoginName (username)

Specify the type of value to be returned in the resolution for the application that uses the NIC proxy.


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set value-type value-type

For example:


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set value-type SaeId

(Optional) If the key can have more than one value, specify that the key can have multiple corresponding values.


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set expect-multiple-values

(Optional. Available at the Advanced editing level.) If the application provides a constraint in the resolution request, specify the data type for the constraint. The constraint represents a condition that must or may be satisfied before the next stage of the resolution process can proceed.


                  
                     [edit shared sae configuration nic-proxy-configuration
                        ip resolution]
                     
                     user@host# set constraints constraints

Configuring Resolution Information for a NIC Proxy (SRC CLI)

Related Topics