Defining an Alarm to Monitor the Status of an Object (SRC CLI)

You can configure a monitor to identify when a MIB object appears, disappears, or changes value. If the test criteria are met, the test is considered to be successful.

Note: Configure only one monitor test at a time.

Before you define an alarm type, configure the associated SNMP alarm.

See Configuring an SNMP Alarm on a C Series Controller (SRC CLI).

To configure an alarm to monitor the status of an object:

• Specify the type of alarm: present, absent, or changed. For example for an alarm named existence-alarm:

  [edit snmp monitor alarm existence-alarm existence-test]

  user@host# set type present

Related Topics

• Defining an Alarm for an SNMP Monitor That Compares Object Values (SRC CLI)
• Defining an Alarm for an SNMP Monitor That Compares Values Against Thresholds (SRC CLI)
• Configuring an SNMP Alarm on a C Series Controller (SRC CLI)
• Configuration Statements for Customized SRC SNMP Monitors
• SNMP Monitoring on C Series Controllers

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.