[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring NTP Client Mode for a C Series Controller (SRC CLI)

Use the following configuration statements to configure NTP on a C Series Controller to operate in client mode:


            
               system ntp server address{
               
               version version;
               
               prefer;
               }

To configure NTP to operate in client mode:

From configuration mode, access the configuration statement that configures an NTP server, and specify the IP address or hostname of an NTP server.
[edit system ntp] user@host# edit server address

For example, to specify an NTP server that has an IP address of 192.0.2.30:

[edit system ntp] user@host# edit server 192.0.2.30 [edit system ntp server 192.0.2.30] user@host#
(Optional) Specify the version of NTP to be used for outgoing packets.
[edit system ntp server address ] user@host# set version version
(Optional) If you configure more than one time server, specify whether this server is to be contacted first for synchronization.
[edit system ntp server address ] user@host# set prefer

Configuring NTP Client Mode for a C Series Controller (SRC CLI)

Related Topics