Avoiding Overcharges for Sessions That Time Out (C-Web Interface)

When an idle timeout terminates a session, you can set up the SAE to reduce the session time reported in the accounting stop message by the idle time. This way the session time is accurately reported; the report avoids overcharges for the session.

To adjust the session time:

1. Click Configure, expand Shared>SAE, and then click Idle Timeout.

   The Idle Timeout pane appears.

2. Enable when an idle timeout terminates a session as described in the Help text.

   The session time reported in the accounting stop message is reduced by the idle time.

3. Click Apply.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.