Starting the NIC (C-Web Interface)

Start the NIC component before you configure a NIC configuration scenario.

To start the NIC component:

1. Select Manage>Enable.

   The Enable pane appears.

2. In the Component box, select NIC, and click OK.

Related Topics

• Before You Configure the NIC
• Starting the NIC (SRC CLI)
• Configuring the NIC (C-Web Interface)
• Restarting the NIC (C-Web Interface)
• Stopping a NIC Host on a C Series Controller (C-Web Interface)

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.