Configuring the NIC (C-Web Interface)

You configure the NIC to enable the SRC software to locate subscriber information for an application.

To configure the NIC:

1. Start the NIC component.

   See Reviewing and Changing Operating Properties for NIC (C-Web Interface).

2. Review NIC operating properties, and change them if needed.

   See Reviewing and Changing Operating Properties for NIC (C-Web Interface).

3. Configure NIC replication.

   See Configuring NIC Replication (C-Web Interface).

4. (Optional) For the initial configuration if you plan to use a configuration scenario other than OnePop (the default), delete any data for the OnePop scenario. If you are changing from one configuration scenario to another, delete the data for the configuration scenario in use.

   See Changing NIC Configurations (C-Web Interface).

5. Configure a NIC scenario.

   See Configuring a NIC Scenario (C-Web Interface).

6. Verify the NIC configuration.

   See Configuring Internal Plug-Ins (C-Web Interface).

Related Topics

• Before You Configure the NIC
• Configuring the NIC (SRC CLI)
• Starting the NIC (C-Web Interface)
• Configuring NIC to Store Log Messages in a File (C-Web Interface)
• Changing NIC Configurations (C-Web Interface)

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.